Prerunner Build Advice Needed - Rear Tire Fitment

[sdhofste]

I have a '14 Double Cab RWD and am looking to go into a mid travel pre-runner setup. I wanted someone with experience to look at my build list and let me know if I will be OK running 35" tires in the rear. I know the fronts will fit with fiberglass fenders but I really, really didn't want to glass the bed. Here's the build details:

 

Front:

Mazzulla Mid Travel Kit (Upper and Lower A-Arms) Link (2-3" of lift with coilovers)

Mazzulla Spindles Link (3.5" or more of lift)

King Coilovers

FiberwerX Fiberglass Fenders Link

 

Rear:

Deaver Minipack J1 Link

King Piggyback Shocks

4.11 Yukon Rear Gears (Stock 3.42)

 

Method Race “NV” Wheel - 17x8.5 0mm Offset 6x135

35x12.5R17 Tires

N-Fab RSP Pre-Runner Bumper Front

 

So, based on that info, I know the fronts will be OK clearance-wise with the 35's, but will the 2" lift from the deaver mini-pak have enough lift to prevent issue on the rear axle?

Edited May 23, 2015 by sdhofste

[Dezrado]

Cant believe no one answered...did you end up going this route? Mazzulla has their shackles and recommend the f87 deavers if you just want to run stock mounted shocks (no bed cage)

[Bvonscott]

No one on here seems to answer any mid travel questions. I was going to look for a specific pre runner forum to get on to ask those questions.