OmniGLH Posted September 16, 2016 Share Posted September 16, 2016 Stinks the 16+ isn't removable. Though I haven't made much use of the space under there. Lost my trailer registration (with updated license plate sticker) in there. Tore the entire garage apart looking for it... and wound up eating another $100 to buy a duplicate from the state. Then one day, cleaning the truck, I popped the cupholder out and ... ta-da! *grumble* Quote Link to comment Share on other sites More sharing options...
sk Posted September 16, 2016 Share Posted September 16, 2016 On the 16's you would have to replace the whole section of the console where the cupholders are. You open the console lid then starting from there pull up on the plastic working your way to the front of the console where the power ports are located. You would need to replace that entire piece with the one from a 2014/15 to get the removable cupholder. Quote Link to comment Share on other sites More sharing options...
DAY11 Posted September 20, 2016 Share Posted September 20, 2016 (edited) Agreed I miss that feature. I saw thread where a guy removed the top piece and said it was empty underneath and he fastened it back with velcro so he could remove it easily and use the space. I have not been willing to take a chance on breaking the tabs so i have not taken mine off to look underneath. Volunteers????? I was told by my dealer advisor that there was now hardware in there for the phone charger pad and you could not store anything there? Just do not know? Do all trucks have the wireless charger thing or is it just the higher packages? I took the cupholder out of my 16 to take a peek at the setup and see what my options were. Ended up adding a second cup holder and leaving the original in place. I don't have access to the larger storage but it does help organize the top and hides some items from site in the small storage area I do have the charger and I don't think there is new equipment under there. Looks the same as other years Edited September 20, 2016 by DAY11 2 Quote Link to comment Share on other sites More sharing options...
victorsdaddy Posted September 20, 2016 Share Posted September 20, 2016 I took the cupholder out of my 16 to take a peek at the setup and see what my options were. Ended up adding a second cup holder and leaving the original in place. I don't have access to the larger storage but it does help organize the top and hides some items from site in the small storage area I do have the charger and I don't think there is new equipment under there. Looks the same as other years Part #? Sent from my Nexus 6P using Tapatalk Quote Link to comment Share on other sites More sharing options...
salem185 Posted September 20, 2016 Share Posted September 20, 2016 (edited) Part #? Sent from my Nexus 6P using Tapatalk GM # 23467147 I got mine for $50.00 + $13.79 shipping from Ebay. Edited September 20, 2016 by salem185 1 Quote Link to comment Share on other sites More sharing options...
DAY11 Posted September 22, 2016 Share Posted September 22, 2016 I got it on eBay. Here is the description. It has some good info in it... You are bidding on a brand new OEM center console cupholder assembly for 2015 Chevrolet Silverado LT, LTZ & High Country. The color is black carbon metallic. This fits vehicles with the factory installed full floor console. Please note: During the 2015 model year, GM changed the texture of the rubber around perimeter of the cupholders. This cupholder has a honeycomb pattern on the rubber area surrounding the cupholders. It fits Late build 2015 1500, 2500 & 3500 HD series. If your cupholder has a smooth rubber area, please check my other auctions. Please look at the pictures to make sure you are ordering the correct cupholder for your truck. In order to install this in the center console with another cupholder, you will need to make modifications. Other buyers tell me that if you shave off the vertical ribs, it will fit with another cupholder. Quote Link to comment Share on other sites More sharing options...
bndawgs Posted September 22, 2016 Share Posted September 22, 2016 GM # 23467147 I got mine for $50.00 + $13.79 shipping from Ebay. Does yours move around at all? Or once you put it in, it fits solid? Quote Link to comment Share on other sites More sharing options...
DAY11 Posted September 23, 2016 Share Posted September 23, 2016 (edited) Does yours move around at all? Or once you put it in, it fits solid? I realize you asked Salem but I wanted to tell you that mine stays in place no problem. Occasionally I move it when pressing or pulling on it. All I did was remove the tabs. I anticipated needing felt tape to stop squeaks or hold it in place but no need. BTW what is nice is that it fits perfectly between original cup holder and the cell phone shelves in the front. All of the rubber slots are still expose perfectly Edited September 23, 2016 by DAY11 Quote Link to comment Share on other sites More sharing options...
bndawgs Posted September 23, 2016 Share Posted September 23, 2016 I realize you asked Salem but I wanted to tell you that mine stays in place no problem. Occasionally I move it when pressing or pulling on it. All I did was remove the tabs. I anticipated needing felt tape to stop squeaks or hold it in place but no need. BTW what is nice is that it fits perfectly between original cup holder and the cell phone shelves in the front. All of the rubber slots are still expose perfectly Very cool, thanks. Will have to add this to the ever-expanding list of mods I want to do. Quote Link to comment Share on other sites More sharing options...
salem185 Posted September 26, 2016 Share Posted September 26, 2016 Does yours move around at all? Or once you put it in, it fits solid? It fits perfectly and does not move at all. Quote Link to comment Share on other sites More sharing options...
Jimlame Posted June 8, 2017 Share Posted June 8, 2017 I opened mine and there is nothing but a big empty space so I ordered the insert and cup holder for a 2015 and I'm going to swap them out so I have it Quote Link to comment Share on other sites More sharing options...
Ludasmith Posted June 8, 2017 Share Posted June 8, 2017 How much was the insert and holder? 1 Quote Link to comment Share on other sites More sharing options...
2016 Sierra Owner Posted June 9, 2017 Share Posted June 9, 2017 How much was the insert and holder? The post above say he paid $50 plus shipping. Here they are listed on ebay... http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=23467147&_sacat=0 1 Quote Link to comment Share on other sites More sharing options...
Jimlame Posted June 9, 2017 Share Posted June 9, 2017 I payed 188 from the dealer 1 Quote Link to comment Share on other sites More sharing options...
Jimlame Posted June 10, 2017 Share Posted June 10, 2017 I have a 2017 truck so I wanted to make sure it was new like my truck so I ordered from dealer you never know what your getting online 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.