Jump to content

  • Sign up for FREE! Become a GM-Trucks.com Member Today!

    In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. 

New Guy with a 2002 Chevrolet Avalanche Z71 w/OnStar

Aaron Michael Grayer
 Share

Recommended Posts

Aaron Michael Grayer New Member

Aaron Michael Grayer

Posted
Posted

Hello folks,

 

I'm Aaron Grayer and I'm a new guy here.

 

Short intro, I'm currently a Auto/Diesel Tech student and musician (yes, they do go together). Got hopes and dreams of working for Ohio CAT and making something of myself in the industry. I am also a die hard GM Truck fan, which is why I joined GM Trucks :D

 

Currently, I have an issue that I'm confronted with on my truck. I installed and wired correctly an XO VIsion X358 Single DIN In Dash Receiver. After searching to the ends of the Earth it seems like, I finally found a radio harness compatible for my truck. However, I'm still confronted with the same problem: I have to fuse the Orange (Illumination), Yellow (Radio Constant), and Red (Radio 12V Ignition) wires together for the radio to power on. As you may suspect, this mean the radio is receiving constant power. I have to pull the radio fuse under the hood to disconnect power to the radio but I noticed it also disconnects power to my speedometer, tachometer, message center, LED display in the cluster, oil pressure gauge, temperature gage, illumination in the door panels, fog lights, the light in the ashtray and the HVAC controls. I still have the factory radio and I've seen some YouTube videos of people with the same GM setup successfully but they never walk through the steps of how they did it.

 

Can someone here help me please? I would gladly appreciate it!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

    • Ronjon
      Moog ball joints and bushings for lower control arms
      By Ronjon
      Anybody know the part number for moog lower control arms ball joints on stock arms? Bushings, poly and rubber would be a bonus. Couldn't find the individual parts on their site or here.
       
      I'm replacing the UCA's (3.5" Coilover lift) with aftermarket and they're preinstalled with a 1 ton moog problem solver and moog rubber bushings (may swap with polyurethane when wear out since they have a compatible part number). Would be nice to do the same with the lower control arms or have the option to.
    • LumberCat
      2016 taillight issue
      By LumberCat
      I am having an issue where my running lights are not working on passenger tail light. Brake lights and turn signal works just fine. When I take my key out and there is a minute of lights being on everything works. I replaced the wiring harness as I saw this was a common issue but the same thing is still happening. I am thinking it is the actual connector the wiring harness is going into.
    • José Daniel Gonzalez
      ACM module
      By José Daniel Gonzalez
      I have a 2017 Chevy Silverado and I have been having trouble with the entire radio and screen .. I recently replace a bad HMI module that I got from infotainment.com and it solved the issue. Now the screen is back to black and the display where the gauges are says “audio off” any idea why ?? Anyone have this issue I tried everything. Maybe I need a new ACM module now? HELP ! 
    • msteinkraus
      4L60E transgo sk kit issues
      By msteinkraus
      I am currently helping my father with his transmission rebuild for the 4l60e on a 2002 avalanche, he installed a transgo 4l60e sk shift improvement kit along with adding a corvette servo. he installed a cam on the 5.3 and the engine runs flawlessly and for the transmission he added a 3000 stall converter. the transmission will shift into reverse fine and will shift into second with using the manual shift, however the transmission will not shift into drive. the valve body has been checked over and over again and everything seems to be in place. Has anyone else had this issue or know what may cause this? Any help would be greatly appreciated!
    • bpdamas
      GMC Hummer EV Digital Key
      By bpdamas
      Does anyone know how to add the digital key for the GMC Hummer EV? It says it should be in the app to select but I don't see it there. I followed the manual instructions as well but don't see the option for a digital key. If anyone knows or can help I would appreciate it. 

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    241.4k
    Total Topics
    1.4m
    Total Posts

  • Member Statistics

    305,419
    Total Members
    8,960
    Most Online
    Jay Kuropatkin
    Newest Member
    Jay Kuropatkin
    Joined


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept