Sign up for FREE! Become a GM-Trucks.com Member Today!
In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience.
so i have a 2003 sierra and the signal and defrost went out of the passenger mirror, so i bought a new glass and the signal didnt work, so i returned the mirror and got to looking into a whole new mirror. i looked at my build sheet and it says i have power folding mirrors, which i didnt know ! i bought the truck used. once i recognized this i tried to fold them in and it didnt work. the production code in the glove box says i have DL3 mirrors. so after all this i just want to know if i have power folding mirrors and maybe there broken? any thoughts or advice and maybe the best place to get new mirrors or mirror
I wanted to start this thread as a continuation from my DL8 to DL3 Mirror Conversion here.
Based on the 6 months of research in the above thread, feedback from many of the members here, and observing behavior of other member's experience...
I am now able to officially offer a Plug and Play Harness Solution for those that want to upgrade their Standard DL8 Mirrors to the DL3 Mirrors on their 2014* - 2017 Silverado/Sierra Trucks (LT/SLE Trims).
DL8 Mirrors - Power Adjust, Manual Fold, and Heated
DL3 Mirrors - Power Adjust, Power Fold, Heated, Auto Dim (Driver's Side), Turn Signal and Puddle Lamps
This has been tested on the following models:
2014* - Silverado/Sierra LT/SLE - 1500* (Known issue with Puddle Lamps - Diode mod workaround required)
2015 - 2017 Silverado/Sierra LT/SLE
Please see Vehicle Acceptability for Retrofit Document Here. Keep in mind that this document is intended for Towing Mirrors, but based on feedback, they seem to follow similar acceptability requirements.
There might be additional wiring needed for other trucks. If you decide to purchase the harness anyway, I can assist as much as I can. However, there is no guarantee that it'll work without BCM/Memory Module Calibration (and if that's even possible), or additional wiring for missing circuits in the inline door hinge connector. Also, if you are outside of the compatibility requirements, I would need some additional information/photos of your truck connectors to determine if this harness will work or not.
The Plug and Play Harness will be pinned for the following functionality.
Auto Dim (Driver's Side)****
***For Power Fold, you will need a new Mirror Adjust/Power Fold Switch - Part # 23154702.
****For Auto Dim (Driver's Side) - You will need to add a Auto Dim Rear View Mirror AND run the additional (4) Circuits needed to the X51L Fuse Panel and X61A Junction Box. Please see thread here for details.
The Harness Set for both Driver and Passenger is $225 Shipped (lower 48) via PayPal (as Family and Friends). I ship USPS Priority Mail 2-3 Day Shipping. Once you receive the Harnesses, Install, Test, and Confirm all is operational, you have the option of shipping me your Stock DL8 Harness for a $40 Core Refund.
Recently Browsing 0 members
No registered users viewing this page.
Most OnlineNewest Member
Who's Online 68 Members, 0 Anonymous, 1,342 Guests (See full list)
- Domenic Bufalini
- SILVER SLED
- Parrish Mooneyham
- Eddie Roberts
- GMC Jerry
- michael betz
- Adrian Campos
- Uncle Redhead
- Phil Mac