Crimson6.2L Posted March 19, 2017 Share Posted March 19, 2017 I found a ptm tailgate handle (23128692 PTM) and I was wondering if it will fit a '17. I've only seen them say they go from 14-15. And my tailgate locks with my remote, would that work with it if this handle does fit? Quote Link to comment Share on other sites More sharing options...
Abearclaw Posted March 19, 2017 Share Posted March 19, 2017 I found a ptm tailgate handle (23128692 PTM) and I was wondering if it will fit a '17. I've only seen them say they go from 14-15. And my tailgate locks with my remote, would that work with it if this handle does fit?Where did you find this at? Is it from GM? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
HoosierZ Posted March 19, 2017 Share Posted March 19, 2017 It's not a GM part. It's made in Taiwan. I bought a PTM handle from Amazon. It fit fine but the handle isn't as solid feeling as the factory part. I had to swap part of the linkage and a spring over from the factory handle to get the power lock to work. 1 Quote Link to comment Share on other sites More sharing options...
Crimson6.2L Posted March 19, 2017 Author Share Posted March 19, 2017 Would it be worth it to order one and have it painted even if it isn't as solid as factory? Quote Link to comment Share on other sites More sharing options...
HoosierZ Posted March 19, 2017 Share Posted March 19, 2017 Looking back, I should've had my factory handle smoothed and painted. I may still do that. Quote Link to comment Share on other sites More sharing options...
cbrsilv15 Posted March 19, 2017 Share Posted March 19, 2017 I vote for just having the oem handle smoothed and painted. If I had to do mine again, I would separate the handle from the bezel to make it easier to paint. 1 Quote Link to comment Share on other sites More sharing options...
Crimson6.2L Posted March 19, 2017 Author Share Posted March 19, 2017 What grit paper should be used in what order? And did you paint it yourself or take it to someone? Quote Link to comment Share on other sites More sharing options...
jimmyboy8301 Posted March 19, 2017 Share Posted March 19, 2017 I would just smooth/paint OEM Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
cbrsilv15 Posted March 20, 2017 Share Posted March 20, 2017 I painted it myself. Start with 180 to knock it down quick. Finish off with 400. I didn't want mine like glass so I just used adhesion promoter/paint/clear. You can use adhesion promoter and then a sandable primer. Wet sand that with 800 or so and then paint/clear. Follow up with a good wetsand and buff and be careful around the edges because you can burn through. Quote Link to comment Share on other sites More sharing options...
cbrsilv15 Posted March 20, 2017 Share Posted March 20, 2017 1 Quote Link to comment Share on other sites More sharing options...
Crimson6.2L Posted March 20, 2017 Author Share Posted March 20, 2017 So how many coats of each should I use and do you recommend any brands of adhesion promoter primer and clear or are they all about the same? Quote Link to comment Share on other sites More sharing options...
cbrsilv15 Posted March 20, 2017 Share Posted March 20, 2017 I got mine from summit racing. I did 3 light coats of black and 3-4 coats of clear so I could wetsand and buff. Just make sure you use a 2k clear. Spraymax in a rattle can is what I used for my headlight trim since it was small. You can find it on amazon. I went to my local paint shop and bought a pint of black and clear to spray my grille and tailgate handle with my hvlp gun. 1 Quote Link to comment Share on other sites More sharing options...
phabejhmoob Posted April 5, 2017 Share Posted April 5, 2017 I got mine from summit racing. I did 3 light coats of black and 3-4 coats of clear so I could wetsand and buff. Just make sure you use a 2k clear. Spraymax in a rattle can is what I used for my headlight trim since it was small. You can find it on amazon. I went to my local paint shop and bought a pint of black and clear to spray my grille and tailgate handle with my hvlp gun. I agree with the 2k clear. You can get them on Amazon or ebay etc.. they're expansive but well worth it. Puts a real hard coat like factory. Quote Link to comment Share on other sites More sharing options...
OmniCamaro Posted February 19, 2019 Share Posted February 19, 2019 On 3/20/2017 at 8:02 AM, cbrsilv15 said: I got mine from summit racing. I did 3 light coats of black and 3-4 coats of clear so I could wetsand and buff. Just make sure you use a 2k clear. Spraymax in a rattle can is what I used for my headlight trim since it was small. You can find it on amazon. I went to my local paint shop and bought a pint of black and clear to spray my grille and tailgate handle with my hvlp gun. Got a part number? Quote Link to comment Share on other sites More sharing options...
cbrsilv15 Posted February 19, 2019 Share Posted February 19, 2019 1 minute ago, OmniCamaro said: Got a part number? For the adhesion promoter or spraymax clear? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.