High country power steps

[stereojnky]

shouldn't all the wiring be in the gmupfitter catalog?

I posted it for him earlier.

 

Sent from my SM-G935V using Tapatalk

[Boyd_835]

i did find information there pages 859, 860, 861, 1087, 1088, 1089, 1090, 320, 368, all have the connectors information. my issue now is getting a good dealer that will spend a little time with me to order just the plugs or jumper harness, my local dealer wants 235$ for one plug thats same plug online is 30-45$. I would like to by just the jumper harness that goes from the control module to each step. Then buy the plug that feeds the control module and make my own harness that includes; getting a signal for left ext, right ext, left retract, right retract, power, and ground, which should use the 6 prong i believe. Then with the 12 prong harness i would like to buy factory so its plug and play. The 12 prong output would y off and plug into both sets of steps thats how far i am in the thought process so far.

Edited April 13, 2017 by Boyd_835

[Boyd_835]

i found the speed clips or body fasteners that match the factory bolts haven't tried them yet but they should work. Their a m8 speed clip

Edited April 13, 2017 by Boyd_835

[Danijelpav22]

So have you been successful with this install and them working?