Sign up for FREE! Become a GM-Trucks.com Member Today!
In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience.
Installed the borla type-s exhaust couple days ago.
build quality is excellent, fitment was absolutely spot on.
took me 5 beers and about 2 hours...
my thoughts.. on the system... also have a type S on my SRT...
1. Cold start is aggressive! It literally barks.... I was very surprised by this, much louder than my SRT system...
2. After engine warms up and rpms settle down it has the very standard s-type deep burble at idle. If the truck is parked and just running, walking behind it is just music to my ears. Very deep little burble that just sounds great.
3. As you ramp up the rpms and roll through the gears, the sound is deep and pronounced, this is the loudest type-s exhaust I’ve heard. Not in a bad way, just know that you will hear this exhaust unless you absolutely butter the throttle and accelerate like an old woman.
4. No drone in 9th or 10th gear.. no goofy noises or vibrations with cylinder deactivation stuff so that’s a major plus.
happy with the purchase, louder than expected but still nothing too crazy. Getting the ATAK version would be overboard for a pickup in my opinion...
engineers at borla said their touring style is identical to the gmc branded perf exhaust in regards to sound output.
so their 3 levels are
type-s - pretty big jump, aggressive! Crazy cold start that barks
atak- crazy man over the top sound, I don’t think many guys would go this extreme
will get better videos soon
Hey everyone, I just wanted to make sure any of you 2020 guys saw two videos we recently put together on the 2020 Silverado HD. More to come as the embargo breaks on what we can say next week.
Enjoy and make sure to like and subscribe to our channel, PLEASE.
I'm back with another very exciting feature to reveal. It's been requested by many of you that I release a Video in Motion mod for the 2.5HMI for quite some time now. Well, I'm happy to say I've finally cracked it and I'm happy to offer this service for the loyal viewers of this forum.
First of all, let's talk basics. If you have a 2014-2016 you'll notice you can play video but only while in park. And if you have a 2017 or a 2018 GM vehicle you'll notice you cannot play video at all!
Well, I have solved this problem with a 2 for 1 solution. Regardless of your year between 2014-2018, I am happy to offer Video in Motion and Video Enabling for ALL 2014-2018 GM models
Please, do not hesitate to contact me if you'd like this done. Special forum pricing will be given as a thank you towards everyone who has supported me and has encouraged me along the way. I would not have been able to do this without you guys. Thanks for putting your faith in me.
Enjoy the demo, and like always, if you're interested - send me a PM.
Until next time...
*Edit* - For those of you who are curious, this allows videos to be played through USB. We will be adding other input options in the future. This will also allow full navigation controls in nav as well as texting and keyboard use which is usually restricted while driving. And this should be a given but this is for off-road or passenger use only. Please let me know if you have any more questions!
Executive Editor / Publisher, GM-Trucks.com
February 18th, 2019
The Daytona 500 is the original great american race. The history, the track, the location, the excitement. Daytona is where NASCAR began and auto racing was changed forever. But this past weekend the 2019 Silverado changed the idea that the "pace car" has to be a car forever too. In 2019 the Silverado was the first truck to ever to pace the Daytona 500.
Early Sunday morning, right before the big race, we had a chance for a ride in that pace truck around the 2.5 mile tri-oval Daytona track and recorded every second of the experience. Sit back and enjoy!
I'm an engineer at Pacbrake and we are currently developing an air bag suspension kit for the new 2019 Silverado/Sierra (previous air spring kits). While I have CAD models from the manufacturer, nothing replaces working with the physical truck. We are looking for someone who would be willing to have a prototype air spring kit installed on their truck (we would need the truck for about a day in our shop), in return we offer a new air spring kit (installed) once the product is ready and/or cash compensation.
If you're located in the Lower Mainland area of B.C. (our office is in Surrey), please get in touch with me on this forum if you are interested!
Recently Browsing 0 members
No registered users viewing this page.
Most OnlineNewest Member
Who's Online 179 Members, 2 Anonymous, 2,861 Guests (See full list)
- mr. t
- Steve Garnham
- Shawn O'Leary
- James Calderon
- Rob&Sherry Johnson
- Jason Pepin
- David Wilson
- Cody Bannister
- Capt Bob
- Mike Sharp
- Tyler Addis
- [email protected]
- Zetan Drableg
- Marshall rynaldus
- BO TIE 1
- f8l vnm
- RAYS B4U
- Den Nis
- Chris Callanan
- [email protected]
- 99 2500