Sign up for FREE! Become a GM-Trucks.com Member Today!
In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience.
So I recently purchased a 2020 GMC Sierra and I have the jump seat configuration Id like to switch to the jump seat to a center console and I was wondering has anyone done that on a 2019 or a 2020 GM truck already? I feel this is a do-able modification to my vehicle but Im looking to see what I would need to do. If anyone could point me in the right direction that would be greatly appreciated.
By Kiera C.
2001 gmc HD 6.6 Have had no issues prior to this, I have 173 000 on this truck. 92 degree day.
Drove to dump today, turned off, emptied trash, finished and started it back up then drove to the gas station. Turned it off for about 15 minutes, came back out of store, turned it on, started back up then immediately died. Tried to turn it on again and it did not turn over. My dash came on, my gauges worked and it shifted into neutral no issue. Just wouldnt turn over, wouldnt even click. My only light that did not come on on the dash was my WAIT TO START icon for the glow bulbs. Had to have it towed home. Let it sit about 40 min, my husband went out to try it but used the spare key and started up no issue. Twice. No delay in turn over. I went and tried with both 3x each and it started up also, but took longer to actually start.
Last oil and fuel filter change less than 1000 miles ago. Batteries 6.months old. I havent started looking at relays or fuses.
What would be the difference between symptoms and trouble shooting a bad ignition switch versus a bad starter?
Any help appreciated.
By Corey H
GM OEM TRI-MODE POWER BOARDS FOR SALE FOR 2019-2020 modeL SIERRA AND SILVERADO trucks.
great shape. Minor scratches. Only on The original vehicle for a couple months.
SHIPPING FROM NEW ORLEANS
PRICE = $900 + shipping cost
Black Onyx Gloss Door Handles OEM 2016-2018 GMC Sierra (Set of 4). $ 75.00 Buyer pays Shipping
This is for general information, and documentation, if others have the same or similar problem(s) with their Air Conditioning.
So, my AC conked out late-day on a 90+ degree May 26, on a 2017 GMC Sierra 2500HD Crew Cab, 6.0L, bought 8/31/2017 (2.5 years old) and almost 55,000 miles (highway mostly). Thought it might be OK the next day, but, no, the compressor was 'screaming'. It took a week to get it into the GMC dealership on Friday, June 5th. Tech diagnosed a leak at the condenser, leak at a hose fitting, and malfunctioning compressor. The compressor, when the AC is off, freewheels. But this one freewheels, then seems to want to engage, the freewheels again, then seems...and so on. Tech said compressor caused high pressure in hose (low pressure hose I think he said?) which cause fitting to leak. In addition, the compressor problem accelerated the condenser leak (known to leak after a while) at a weld joint (left-front). Man, I was pissed. Not at anyone in particular, but the fact that an AC can fail at only 55,000 miles. My 2006 GMC Sierra 2500HD, 6.0L, longbed, extended, lasted over 160,000 miles and over 10 years without an AC problem except a recharge.
Cost? $1799.24 to fix! (900 parts, and 900 labor for 7.2 hours of work.) I said I'll be contacting GMC corporate, and paid the $66 diagnosis fee (worth it; 0.5 hours of labor). On Monday, I called to pickup a price list with part numbers for the repair so I can use for my case. Well, I looked up the part numbers on Google and found a Chevrolet dealership out of Winston-Salem, gmpartsdirect.com (FLOW of Winston-Salem), selling genuine GM parts for greatly reduced prices. Now, mind you, the dealership may have discounted their prices by 15% if I asked because I bought it there, and GM corporate 'may' have covered half the cost (or maybe full cost?), but it was technically out-of-warranty with the 55,000 miles. BUT, at these gmpartsdirect.com prices, I can get it done myself and save, with labor by myself, about $1200!
Obviously, I ordered the parts and will do the job myself... Saves the hassle, aggravation, and arguing with GMC... ba**ards. Wish they would make a decent product again. AC failing this early used to be unheard of. "The New Normal" I guess.
Here is the price list, and the dealer's price...
Recently Browsing 0 members
No registered users viewing this page.
Most OnlineNewest Member
Who's Online 111 Members, 0 Anonymous, 2,580 Guests (See full list)
- James S
- Trinidad Barrera
- Rick Bush
- Sierra Sik
- Kevin Wilson
- Delta D
- Marcel Almeida
- Ryan Flanagan
- Christian 129
- Alfredo Colalillo
- Sergio Esquivel
- Britney Curley
- Jared Hoefsmit
- Brian Bronston
- Oregon 2020 AT4