Jump to content

  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoticons maximum are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Nobody-117
      I am doing a little bit of research on possibly getting my 2015 1500 Silverado cermaic coated. My truck is black so it shows dirts and dust fairly easily. I have always applied wax to my previous cars just had heard about ceramic coating through social media. The product that I have heard the most is called CeramicPro. If anyone has used it on their vehicle how did it turn out? Any help is appreciated.
    • By Zane

      Zane Merva
      Executive Editor / Publisher, GM-Trucks.com
      April 12th, 2019
       
      A few months ago we started to notice something on our 2019 Silverado that no owner of a brand new vehicle wants to see. Rust. Specifically on our rear bumper, just around the plastic step. It wasn't huge and didn't spread very far from the edge... but we couldn't stop noticing it. There was no excuse for rust on a 8 month old vehicle with less than 10,000 miles. The photo above shows the minimal but noticeable rust patch. It was even happening on both sides and in the same place. The issue seemed odd. 
       
      Unfortunately, we've just been too busy to bring it by to our local dealership for them to look at. Lucky for us, our procrastination has paid off, because in the time between us first noticing the problem and getting off our lazy asses to drive to our dealer, GM has released a TSB about this very issue. 
       
      It appears that on most of the early trucks, production of the bumper was completed incorrectly. The steel assemblies should be bent into shape then chrome plated. But that didn't happen in a small part of the early bumpers. The supplier bent the area around the side step after the bumper was chromed. The new folds in the steel damaged the chrome, cracking it and making the truck susceptible to rusting. 
       
      What's the fix? If your bumper is rusting already, Chevy and GMC will replace it. If it has not yet started to rust, they will apply an automotive grade wax/sealant to prevent rust in the future. 
       
      If you're unsure if your 2019 has this issue we suggest doing the following:
      1. Give your truck a bath for heavens sake!
      2. Clean the rear bumper step area with a hose or pressure washer. Front and back! We find lots of dirt collects behind our step in the bumper assembly.
      3. Inspect around the foot step area and behind the foot step area. We found rust in both areas!
      4. If in doubt, wait for it to rust and kindly ask for a new rear bumper. 
       
      Our dealership, Banks Chevrolet in Concord, NH has been great getting our rust issue fixed. Our service adviser Justin has kept us in the loop during the repair and gave us a loaner Silverado LT while they have our truck. He even made sure any other outstanding service updates are also applied to our LTZ while it was in the shop. As it turned out, there were six open issues that needed addressed. 
       
      Here's the official Service Update you can print out and bring to your dealer when you take your Silverado or Sierra in for service. 
       
    • By mrbadwrench
      The bed corners (getting thin) and the rear leaf shackles (lots of pack out) in particular may be a problem soon. But it's an awful pain in the butt to crawl around under there trying head off rust at the pass. How much longer do you think this truck's got before I have to worry about something giving out at max payload?
       







    • By accioio
      Hey guys,
      I just bought a beater silverado that I intended to keep for a month or two. Just wondering what you think of the rust situation? Worth putting any work into the vehicle and keeping it going for a bit? It has 215, 000 km on it. Haven't dealt with a rust situation like this before. I'll show pictures of the worst parts.



    • By pavementprincess17
      Hi everyone, I'm new here, apologize for any posting errors in advance. 
       
      Just picked up a CPO 2017 Sierra 1500 earlier this month after trading in my 2013 1500. Paint is in very good condition as it only had 12,xxx miles when I bought it so looks like the miles were gentle. I want t keep it looking as good as it does now and I keep seeing posts on social media about ceramic coatings. I really know nothing about it so wanted to hear from those who do. How long does it last, how do you wash it once applied, about what should I pay for a service like that, does the surface feel like there is wax on it or does it feel like bare metal? 
       
      Any other info would be greatly appreciated!
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Forum Statistics

    206,673
    Total Topics
    2,210,525
    Total Posts
  • Member Statistics

    175,998
    Total Members
    8,960
    Most Online
    ghostlysilverado
    Newest Member
    ghostlysilverado
    Joined
  • Who's Online   60 Members, 0 Anonymous, 409 Guests (See full list)

×

Important Information

By using this site, you agree to our Terms of Use.