Just bought my first GMC a week ago. It is a 2016 with 55,000 miles 5.3 SLT 4x4 with Z71. I looked the car over pretty good but noticed something after we got home. Is this the common leaking crimps I have been learning about on these vehicles with transmission lines? I have to crawl under the vehicle this weekend but this was the picture I was able to get. The gunk had no smell to it at all.
And not sure if the Rancho shocks are completely shot on this Z71 package but on the highway and my first speed bump the words....Old Cadillac came to mind about how much it wallows. Thanks everybody for your time....
Here it is Nov 2018 time for another drawing.
1st prize is an OE oil change. Winner will need to contact me with how many qts they need for their vehicle and what weight they need. What is available is 0w-20, 5w-20, 5w-30, 10w-30 and 15w-40, 10w-30 for the diesel crowd.
2nd prize is a bottle of AMSOIL's P.i. Performance Improver
3rd prize is a can of AMSOIL's MP Metal Protector.
To enter to win, all you need to do is post one time in this thread. More than one post will disqualify you.
Drawing ends at midnight the 18th of Nov 2018.
Good luck everyone!
I purchased a 2014 gmc 5.3 with 80k. the lifters were all replaced under warranty. soon after i noticed 10 psi oil pressure after driving 25 min on highway. dealer replaced oil pump still has 10 psi after 25 min of driving. when i first start up its at 40, oil pressure goes to 70 when rpm exceeds 3500 rpm. oil pressure starts to drop to 20 after 10 min and seems fine. after 25 min it drops to 10 on guage. i had oil pressure checked with mechanical guage and confermed guage is accurate. i asked dealer to che k the screen under oil pressure switch they said it was clean. at this time dealer says nothing is wrong due to specs at 1000,2000,3000 rpm. i called gm customer care and they said to get different dealer to look at. i did and they confermed rpm at different rpm and charged me 118.00 gm customer care did nothing to help me out. i have never seen any truck with 10 psi at idle. does anyone else seem to have this issue?
I recently did a dod delete on my 2007 suburban. 6.0 200,000 miles. I thought the problem was the afm lifters being that there was a tick at highway speeds. I only had a tick at highway speeds. If I drove on the street I would never get the noise. As soon as I held a steady speed on the highway I would get what sounds like a lifter tick. The dod delete work was done by a Preformance shop. I do not think that dod was the problem. If I hold the throttle steady at 2000rpm while in park I can get the tick to come on. After I let the engine idle about 2-3 minutes the tick goes away. As soon as I hold the rpms back up it will come back and repeat the process. No loss of power while this is happening and no other sounds. Oil pressure is about 10-15 at idle and close to 40 while on highway. I would greatly appreciate any help.
Recently Browsing 0 members
No registered users viewing this page.
Most OnlineNewest Member
Who's Online 137 Members, 0 Anonymous, 1,008 Guests (See full list)
- Mike Thomas
- Jesse Davidson
- Booger T
- big papa
- Bolsby 2019 AT4
- Aaron McCurdy
- Scott Roberts
- Grumpy Bear
- 14 Silvy
- CAE AT4
- Nicholas Auxier
- No Tyme
- RAYS B4U
- RS B
- Kevin Diehl