Jump to content

Sign in to follow this  
Sierra Dan

GMC MultiPro Tailgate Information

Recommended Posts

Some useful information from GM TechLink regarding the GMC MultiPro Tailgate.

Remember, Do not lower the inner gate with the primary gate open while a receiver hitch is present or :smash:

 

Trucks Equipped with a Hitch Ball

Do not lower the inner gate with the primary gate open (easy access or step positions) if a hitch ball or trailer is attached. This may damage the tailgate due to the amount of clearance between the hitch receiver and the lowered inner gate. (Fig. 26)

F26-g-inner-gate-lowered-R.jpgFig. 26

Tailgate Operation

When the BCM receives a release command to release the primary tailgate or inner (auxiliary) gate, it applies a brief pulse of voltage to the appropriate left and right pickup box latch relay control circuits, which energizes the coil side of the relays. The switch side of the appropriate left and right latch relay then momentarily closes, supplying a brief pulse of battery positive voltage to the left and right pickup box primary tailgate or auxiliary endgate latches. (Fig. 27) The latches activate to release the gate.


F27-g-inner-latch.jpgFig. 27

The inner auxiliary pickup box endgate must be in the latched position before commanding the primary tailgate to release. The BCM disables the primary tailgate release function if the inner auxiliary pickup box endgate is open or ajar.

Share this post


Link to post
Share on other sites
Some useful information from GM TechLink regarding the GMC MultiPro Tailgate.
Remember, Do not lower the inner gate with the primary gate open while a receiver hitch is present or :smash:
 

Trucks Equipped with a Hitch Ball

Do not lower the inner gate with the primary gate open (easy access or step positions) if a hitch ball or trailer is attached. This may damage the tailgate due to the amount of clearance between the hitch receiver and the lowered inner gate. (Fig. 26)

F26-g-inner-gate-lowered-R.jpgFig. 26

Tailgate Operation

When the BCM receives a release command to release the primary tailgate or inner (auxiliary) gate, it applies a brief pulse of voltage to the appropriate left and right pickup box latch relay control circuits, which energizes the coil side of the relays. The switch side of the appropriate left and right latch relay then momentarily closes, supplying a brief pulse of battery positive voltage to the left and right pickup box primary tailgate or auxiliary endgate latches. (Fig. 27) The latches activate to release the gate.


F27-g-inner-latch.jpgFig. 27

The inner auxiliary pickup box endgate must be in the latched position before commanding the primary tailgate to release. The BCM disables the primary tailgate release function if the inner auxiliary pickup box endgate is open or ajar.



One of the many reasons why jumping on the first year new model is a no no. They’ll redesign and reconfigure with a couple more years along with all the bugs (hopefully) fixed. Makes you wonder what else was rushed onto production hmmmmm


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
4 minutes ago, TXGREEK said:

 


One of the many reasons why jumping on the first year new model is a no no. They’ll redesign and reconfigure with a couple more years along with all the bugs (hopefully) fixed. Makes you wonder what else was rushed onto production hmmmmm emoji848.png


Sent from my iPhone using Tapatalk

 

Well for now, there are many 2019's sitting on the staging lots in Fort Wayne Indiana due to warped or ripples windshield glass and problems with paint.

So wonder no more :lol:

Share this post


Link to post
Share on other sites
Well for now, there are many 2019's sitting on the staging lots in Fort Wayne Indiana due to warped or ripples windshield glass and problems with paint.
So wonder no more :lol:


Go figure, innovation at its best lol. I feel like hugging my 18 right now, haha


Sent from my iPhone using Tapatalk
  • Like 1

Share this post


Link to post
Share on other sites

They will all have problems.

Bottom line is that most of the Automotive Companies RUSH vehicles to production instead of taking a few extra months or even up to a year to really work them

over and smooth out the rough patches. Perhaps they do this to meet the "demand" we consumers impose?

Auto Companies need to stop and smell the roses.

After-all, they would benefit more because fewer if any recalls would be made thus saving the companies thousands if not

millions of dollars in dealership reimbursements and civil lawsuits due to faulty parts, poor engineering or assembly.

  • Like 1

Share this post


Link to post
Share on other sites
They will all have problems.
Bottom line is that most of the Automotive Companies RUSH vehicles to production instead of taking a few extra months or even up to a year to really work them
over and smooth out the rough patches. Perhaps they do this to meet the "demand" we consumers impose?
Auto Companies need to stop and smell the roses.
After-all, they would benefit more because fewer if any recalls would be made thus saving the companies thousands if not
millions of dollars in dealership reimbursements and civil lawsuits due to faulty parts, poor engineering or assembly.


Excellent thoughts!


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.