Jump to content

Gorehamj

GM's 6.2-liter V8 Engine Honored By Wards Auto

Recommended Posts

silverado 6.2 v8.jpg

John Goreham
Contributing Writer, GM-Trucks.com
12-12-2018

 

Wards has named the General Motors 6.2-liter V8 engine with Dynamic Fuel Management (DFM) to its  2019 Wards 10 Best Engines Award list.

 

“General Motors’ thundering 420-horsepower V-8 in the Silverado exemplifies how engineers continue to find ways to improve efficiency without giving up something in return. DFM determines 80 times per second exactly how many cylinders require fuel to meet power demands. And, incredibly, it uses as few as two cylinders to propel the full-size pickup down the highway,” says Wards' Senior Content Director Drew Winter. “The truly amazing part is the cylinder deactivation is imperceptible, so seamless that the only thing the driver notices is fewer stops at the pump."

 

 

Coincidental to the award, GM-Trucks.com has just taken delivery of a long-term tester with this very engine. 

 

“Chevrolet first introduced its Active Fuel Management cylinder deactivation system in 2005, and Dynamic Fuel Management is a natural progression of the technology,” said Jordan Lee, Small Block chief engineer. “Dynamic Fuel Management enables only the cylinders needed to deliver the power you want, seamlessly delivering the best balance of power and fuel economy.”

 

The full list of Wards' 10 best engines is as follows:

3.0L (B58) DOHC Turbocharged I-6 (BMW X5)
6.2L OHV V-8 with DFM (Chevrolet Silverado)
5.0L DOHC V-8 (Ford Mustang GT/Bullitt)
3.0L DOHC TurboDiesel V-6 (Ford F-150)
2.0L DOHC Atkinson i-VTEC 4-Cyl./HEV (Honda Accord Hybrid)
120-kW Fuel Cell/Electric Propulsion System (Hyundai Nexo)
150-kW Propulsion System (Hyundai Kona EV)
2.0L DOHC VC-Turbo 4-Cyl. (Infiniti QX50)
2.0L DOHC Atkinson 4-Cyl./HEV (Lexus UX 250h)
3.6L DOHC Pentastar eTorque V-6 (Ram 1500)

 

 

 

Share this post


Link to post
Share on other sites

I wish the AFM on my 2018 was "...imperceptible, so seamless..."

 

I did not notice the AFM the first few times I drove the truck, but after a little more time behind the wheel, I became much more aware of the switches.  I basically can't tolerate it for city driving.  The coarseness and surging is really annoying. 

Edited by rkj__

Share this post


Link to post
Share on other sites

The "10 best engines" list includes 2 electric propulsion systems. :lol:

  • Thanks 1
  • Haha 1

Share this post


Link to post
Share on other sites

Hard to find that impressive since the release of the ECOPO. 

Share this post


Link to post
Share on other sites

Too bad it’s not a readily available engine.  

  • Like 2
  • Thanks 2

Share this post


Link to post
Share on other sites
On 12/13/2018 at 5:16 PM, SILVER SLED said:

Too bad it’s not a readily available engine.  

Readily available for advertising.

 

420hp! 460tq!

 

Finding one on your local lot? Not so much. 

  • Like 1

Share this post


Link to post
Share on other sites

so seamless that companies make tuners and range make a device to deactivate the crap my 2014 was great until about 30k and now at 85k it leaps and vibrates so bad that i finally got a tuner and turned it off and i still have warranty left but i dont care

Share this post


Link to post
Share on other sites
19 minutes ago, silveradosid said:

so seamless that companies make tuners and range make a device to deactivate the crap my 2014 was great until about 30k and now at 85k it leaps and vibrates so bad that i finally got a tuner and turned it off and i still have warranty left but i dont care

You will not be able to do that on the 2019's.  From what I'm told, the system is locked down tight.  No aftermarket tuning at all.

Share this post


Link to post
Share on other sites

I believe the 6.2 is a very good engine overall.  In the Truck, and in the Vette.  They are fairly reliable but being a forum like this, we'll see the brunt of any issues they may have with people coming here to vent and look for help.  I would love to have a truck (Or vette!) with that engine in it.  You folks that have one, consider yourself very fortunate and enjoy them. 

  • Like 1

Share this post


Link to post
Share on other sites
On 12/19/2018 at 7:31 PM, Colossus said:

 You folks that have one, consider yourself very fortunate and enjoy them. 

The primary reason I searched high, low, far, and wide for Clyde. The 6.2L V8 was at the very top of the required options list. Well worth the money :D

  • Like 1

Share this post


Link to post
Share on other sites
On 12/18/2018 at 8:13 PM, 2009GMC said:

Readily available for advertising.

 

420hp! 460tq!

 

Finding one on your local lot? Not so much. 

Found a lot of them in Silverado High Country's and then in LTZ Z71 in the Phoenix area when I was looking for a Max Tow equipped truck.  Likewise I found several in GMC Denalis.

Share this post


Link to post
Share on other sites
On 12/19/2018 at 7:31 PM, Colossus said:

I believe the 6.2 is a very good engine overall.  In the Truck, and in the Vette.  They are fairly reliable but being a forum like this, we'll see the brunt of any issues they may have with people coming here to vent and look for help.  I would love to have a truck (Or vette!) with that engine in it.  You folks that have one, consider yourself very fortunate and enjoy them. 

I really enjoy ours, the acceleration and handling are heads above the GMC 2500HD Duramax.  The 6.2L has 110,000 and running great.  Happy it doesn't have AFM.  I only bought the GMC to go with a larger fifth wheel.  Feature wise it is an upgrade from the 1500.  We kept the 1500 for short trips and around the Phoenix valley. 

Share this post


Link to post
Share on other sites

The listed engine is the 6.2L with DFM new for 2019.  And it is much more seamless than my AFM trucks.  Great engine so far.  Only time will tell how it goes after some miles.  Paired with the 10 speed, I really like it so far.

 

you all seem to be discussing the previous engine with AFM.

Edited by JacobC1983

Share this post


Link to post
Share on other sites

T

On ‎2019‎-‎01‎-‎01 at 7:10 AM, Stonewood said:

I didn't know there was an available 6.0L  No complaints with my 5.3.

 

image.png.7a3dbfd803b219d06d3b09fcf4d2e0c0.png

2500's are still running the LS family 6.0L from the 2000's called the L96. It is an iron block engine, while the ecotec 5.3 (L83) and 6.2 (L86/87) are aluminum block engines. Aluminum is not the best "work truck" block material, they prefer to use iron for hard use/towing applications. You can not get a 1500 with a 6.0L and you cant get a 2500 with a 6.2L. There is a new 2500 engine in the works for the 2020 HD's, rumor has it around 6.7L but that seems overkill to me. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

    • By Hdchevyclassic
      Need some opinions on what the heck is going on with my 2007 silverado classic. It has a 4.8 litre vortec with an afe cold air intake, edge cts2 programmer, gibson shorty headers, and a 3 inch catback exhuast. I have the code p0430 coming up but cant figure out what it is. Ive done a back pressure test on the cats, and did knock sensors and all O2 sensors a year ago. It doesnt feel like it has a misfire and im very mechanically inclined and everything in this truck is looked after. When i bought it there was a 4wd code and it wouldnt engage so i swapped out the button cluster in the cab and now it works fine. Other than that the truck has been perfect but id like to figure out what the heck is setting off the code. I have no exhuast leaks and the cats checked out perfect, anyone know what else it could be? Im looking for anything at this point, i hate check engine lights and have cleared it with the programmer but it comes back very shortly after being cleared. Thanks
    • By Nikko
      About to install a 2" motofab under strut leveling kit on monday, but am very concerned with torque specs. I can't find the exact torque specs for everything I need, and I don't even know how important it is for everything to be torqued exactly to specs. It's a 2007 Chevy Silverado 1500 LTZ, 4x4. 
       
      How important is it to be precise when torqueing? Does anyone know where to find all the exact torque specs for my make and model? Has anyone ever done one before, and can you provide insight?
       
      Thanks.
    • By CertainDriver
      Hello everyone,
       
      I recently bought this clean title, high mileage 2000 Silverado LS Z71 from my coworker. It was right before Christmas and I really wanted to help the guy out knowing full well I could do something with it. Heck, I needed a truck after all. I get home and attempt to drain the oil but nothing comes out. After some poking around with a screwdriver, I get it to drain. Chunks are flowing along with the oil and it turns out there was so much sludge build up in the bottom of the pan, it sucked some up, suffered a momentary loss of oil pressure and spun the bearing. I know the transmission had a hard shift from first to second. Could it be low fluid? Maybe, but why do the swap just to find out the transmission is bad?
      My coworker friend was a smoker and it appears he preferred his coffee without a lid so the interior is....interesting. Also truck only has oxidation on the hood and fenders so the only reasonable choice was to find a salvaged donor vehicle to source parts from!!
      I have a buddy with a dealers license and I'm debating picking up this rear ended 2006 Escalade for a FULL front end/interior/dash/drivetrain swap. Can it be done? Plug and play? Anything someone doing something like this should know?
      I've done some pretty crazy engine swaps and garage rebuilds, 2 stroke porting early on, etc. 

      I have the ability but hopefully you folks can chime in and confirm whether or not it is possible or if there is a better option. I was also looking at a 2004 Duramax/6speed which was t-boned pretty good as a potential candidate but there's something about that plush Escalade interior....

       
    • By DougFL
      The end of December, I noticed a small amount of oil on the garage floor under the front of rear differential of my 2WD, 2019 High Country.   It appeared to be a pinion seal leak.  The Dealership concurred and ordered a new front yoke and pinion seal.  Today, the Dealership called and informed me that GM did not have the parts so they sent a Complete new rear Differential as a replacement!!  Now they need my truck for a Full day to swap rear ends.   Appears to be an EXPENSIVE way to replace a $10 part, but GM must know Best!?
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Forum Statistics

    202,398
    Total Topics
    2,155,632
    Total Posts
  • Member Statistics

    171,366
    Total Members
    8,960
    Most Online
    Jay7171
    Newest Member
    Jay7171
    Joined
  • Who's Online   24 Members, 0 Anonymous, 493 Guests (See full list)

×

Important Information

By using this site, you agree to our Terms of Use.