Sign up for FREE! Become a GM-Trucks.com Member Today!
In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience.
I have the following items for sale individually or as a whole. They are brand new, never used, in the box. I had purchased to replace the Fuel Pump system on my 2007 Sierra (new model), but ending up trading in the truck instead.
Here are the parts, part #s and asking price:
1 – GM Fuel Pump Retainer Lock Ring (GM# 10325852/ACD# TR26) $5.00
1 – GM Sensor Kit (GM# 19168426/ACD# SK1294) $50.00
1 – Fuel Pump with seal – (GM#19206532/ACD# M10206) $200
I will sell all 3 together for $230 and that includes shipping. I will also sell the Sensor Kit and Fuel Pump separately if need be for the prices stated (including shipping).
I have noticed when I open the drivers door I here a sound like the fuel pump starting up for several seconds then shuts off. Is this normal? What is the reason for doing this?
If anyone knows of a previous thread that explains similar symptoms please let me know, I haven't been able to find any.
I have been getting a CEL for p0171(lean bank one), p0405 (egr), p0449 (evap vent seloniod), and occasionally p0174 (lean bank two), and p0430 (cat system efficiency below threshold). It makes sense that all of these codes could come together so let me explain a little bit of what's going on. I bought the truck last fall with about 200k miles, and unfortunately had to have the trans rebuilt so I am trying to avoid throwing parts at it and hoping it fixes the issues.
When I bought the truck there was a code for the evap vent seloniod, which as far as I know would more than likely just make it so that the gasses can't excape when fueling and casuse me to have to hold the handle so I haven't been in a huge rush to replace that. There were exhaust manifold bolts broken in the block so I decided to put shorties on while everything was apart since they were relatively inexpensive, but these didn't have the port for egr and I bought the egr block. When swapping the manifolds, I found out the collector on my y pipe was cracked and plan to drop that down and weld it up when it gets warmer out. So I expect those two codes.
As far as the cat efficiency being off, that has only came up a couple of times and I haven't quite gotten a chance to figure out anything that happens consistently before that. When it was real cold my truck would somewhat surge when stopping at stoplights.
Now the bank one too lean code is the one that concerns me the most. For some reason the bank two lean isn't as common, and is usually just a pending fault and not a current fault like the bank one is. I thought maybe the lean codes could be from the known exhaust leak but that seems inconsistent with the bank having most trouble.
Monitoring my fuel trims using torque pro I found that my long terms were pegged at 25 and the short terms were even higher. The short terms dropped when I revved the engine up to around 2500 and I could hear a slight Rev when spraying the intake with brake cleaner. This was on the passenger side, near where the egr was. It was close to the throttle body, and a new gasket was super cheap so I decided to clean the throttle body and clean the gasket which didn't do much if anything for me. Everything I came across looking at fuel trims led to vacuum leak, so I thought maybe the maf was bad so I tried a new one which didn't change anything either. I put the old one back in and removed the egr block flipped the o-ring around and that seemed to help for a day or so.
But it came right back to where it was prior, so thinking it could also be a fuel issues I checked the pressure with a loaner from oriley's. Originally the key off pressure was up near 55 psi, the I turned the engine over and the pressure was around 45. After revving it was around that range still. I let the pressure off the tester and turned the key back on and this time the pressure was getting up to about 30 and then coming to about 25 after starting
The gauge could have bad calibration, or I could have a fuel delivery issue.
Anyways I have not noticed any misfires, nor have I gotten any misfire codes. My fuel trims remain high at idle (ltft 25%, stft from - 3% to around +10%), and lower when under load, especially if I'm actually driving.
I was assuming that if it was a fuel issue I would see the fuel trim higher under load and more normal when idling?
Any suggestions as to what else I could do to try to narrow this down and avoid taking it into the shop? Sorry for the wall of text, but I wanted to explain the best I could as this doesn't quite seem to be making sense.
Recently Browsing 0 members
No registered users viewing this page.
Most OnlineNewest Member
Who's Online 19 Members, 0 Anonymous, 890 Guests (See full list)