Jump to content
  • Sign up for FREE! Become a GM-Trucks.com Member Today!

    In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. 

Recommended Posts

I have a 2019 Chevy Silverado 1500 and my key fob only has the lock/unlock, and the panic button on it. I saw that the official Chevy accessories page has the key fobs with remote start, tail gate unlock on them as well. If I get one, will I be able to have the dealership program it on my current truck so I can have remote start or is this only for replacement for owners that already have the same key fob?

 

5 Button Keyless Entry Remote Key Fob
Part No. 84312372

https://accessories.chevrolet.com/product/2019/Chevrolet/Silverado 1500/5-button-keyless-entry-remote-key-fob-84312372?categoryId=12001

 

Thanks much!

Edited by Semedar
Changed title to reflect topic accurately
Link to post
Share on other sites

Good question.  I would think that you will not be able to just get a different FOB and get it programed.  It is the different trim levels that offer the extras which would have different hardware installed.  But I could be wrong.  Hopefully someone will know.

Link to post
Share on other sites

Silverados without remote tailgate release have just a normal handle on the gate instead of a button, so you’d definitely need some hardware for that. Installing factory remote start in previous generations required a module and programming. Not sure if they sell the factory kit for the 19s.

Link to post
Share on other sites
On 6/4/2019 at 8:31 AM, OnTheReel said:

Silverados without remote tailgate release have just a normal handle on the gate instead of a button, so you’d definitely need some hardware for that. Installing factory remote start in previous generations required a module and programming. Not sure if they sell the factory kit for the 19s.

So I found this:

Remote Start (W/O Power Tailgate) - GM (84312373)

https://www.gmpartsonline.net/oem-parts/gm-remote-start-w-o-power-tailgate-84312373/?c=Zz1lbGVjdHJvbmljcyZzPXJlbW90ZS1zdGFydCZhPWNoZXZyb2xldCZvPXNpbHZlcmFkby0xNTAwJnk9MjAxOSZ0PWN1c3RvbSZlPTQtM2wtdjYtZ2Fz

 

Website shows it fits my Silverado. I’ll talk to my dealership to see if they can install it. Parts page says it comes with its own two key fobs so hopefully this will give me remote start. ?

Link to post
Share on other sites
  • 1 month later...
On 6/3/2019 at 9:30 PM, Semedar said:

I have a 2019 Chevy Silverado 1500 and my key fob only has the lock/unlock, and the panic button on it. I saw that the official Chevy accessories page has the key fobs with remote start, tail gate unlock on them as well. If I get one, will I be able to have the dealership program it on my current truck so I can have remote start or is this only for replacement for owners that already have the same key fob?

 

5 Button Keyless Entry Remote Key Fob
Part No. 84312372

https://accessories.chevrolet.com/product/2019/Chevrolet/Silverado 1500/5-button-keyless-entry-remote-key-fob-84312372?categoryId=12001

 

Thanks much!

Do you have the old body style? or the new body style?

Link to post
Share on other sites
On 7/28/2019 at 2:27 PM, Derek Keith Carbonneau said:

Did you ever find the answer to this? I have the WT, but with the automatic tailgate. Did you just have to buy the kit and install it?

Not yet unfortunately. It's still on my to-do list though! If it's possible..

Link to post
Share on other sites

I asked the service advisor what i needed to do besides buying the remote start fob kit, and this was his reply:

 

Install for the remote start would be $210 (1.5 hours of labor) as it requires calling general motors for a special calibration to add remote start to the BCM and both key fobs to be programmed.

 

so it looks like you need to buy the fob kit, they’ll install and program, and you’ll be good! 

  • Thanks 1
Link to post
Share on other sites
On 7/30/2019 at 12:07 AM, Derek Keith Carbonneau said:

I asked the service advisor what i needed to do besides buying the remote start fob kit, and this was his reply:

 

Install for the remote start would be $210 (1.5 hours of labor) as it requires calling general motors for a special calibration to add remote start to the BCM and both key fobs to be programmed.

 

so it looks like you need to buy the fob kit, they’ll install and program, and you’ll be good! 

I wonder if it’ll show up on the GM myChevy app for the auto start feature once it’s installed. Or will I have to rely just on the fob.

Link to post
Share on other sites
  • 2 weeks later...
I have a 2019 Chevy Silverado 1500 and my key fob only has the lock/unlock, and the panic button on it. I saw that the official Chevy accessories page has the key fobs with remote start, tail gate unlock on them as well. If I get one, will I be able to have the dealership program it on my current truck so I can have remote start or is this only for replacement for owners that already have the same key fob?
 
5 Button Keyless Entry Remote Key Fob Part No. 84312372 https://accessories.chevrolet.com/product/2019/Chevrolet/Silverado 1500/5-button-keyless-entry-remote-key-fob-84312372?categoryId=12001
 
Thanks much!

Is your truck equipped with push button start?


Sent from my iPhone using Tapatalk
Link to post
Share on other sites
14 minutes ago, Userduo said:


Is your truck equipped with push button start?


Sent from my iPhone using Tapatalk

No, I have an actual key to start the truck.

Link to post
Share on other sites
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By austin jez
      Hello all. I have a 2013 silverado w/5.3l flex vin 7. Basically has rough idle in park and drive. Very poor acceleration. Almost seems to bog down when trying to accelerate. It will occasionally surge and for just a split second I can feel a bit of power.  Also doesn't want to downshift when I lean on the gas pretty heavy. I've got to do near floor it to get it to down ****** and when it does it will drop down 2 gears a lot of the time. No engine light and it won't set any codes. Showed 0 misfires on all cylinders. Long Fuel trims usually in single digits negs. Fuel pressure 43-46psi at idle and highway. I've replaced throttle position sensor, Accelerator pedal position sensor, manifold pressure sensor, mass air sensor, plugs, coolant temp sensor, oxygen sensors. Fuel pump, intake manifold gaskets twice (now with "updated" steel gaskets), throttle body gasket/seal, injector o-rings (upper and lower). Tested all coils for strong spark. Smoke tested for vac leaks along with propane. It has never failed to start or even had a long start and has never died/stalled. I'm just kinda at a loss at this point. Any help will be appreciated and possibly considered. Thanks
    • By gbux07
      I am wondering if I can fit 35s on a 3in body lift on a 2013 Silverado Z71 4x4. Will I need wheel spacers or offset wheels? Will stock 18in rims work or do I need aftermarket ones? Thanks
    • By JetForceF22
      Hello Everyone! Before I get started I want to thank anyone in advanced who responds with pertinent information. 

      I'm looking for a replacement exhaust system for my 09 Silverado 6.2L 4x4 Crew Cab/Short Bed. My current system has lots of rust (living in MD, they heavily salt & brine the roads here) and has sprung an exhaust leak right behind the muffler on one of the pipes.

      I've been searching around (thought it would be easy to find a system) but have not had luck in finding what I have been searching for. There are plenty of systems for 5.3L & 6.0L motors but scant any for 6.2L. 

      On my truck currently is an aftermarket cat back system that was there when I bought the truck (not sure which brand.) It is a single in / dual out muffler with dual pipes going out the bumper.

      Questions:
      What is the factory flange diameter at the end of the factory Y pipe? I'm seeing conflicting information (this will help me determine what muffler to buy if I piece meal a system together) 

      If you have any suggested systems, here's what I'm looking for
      Material: 304L Stainless Steel
      Volume: Loud/Agressive
      Configuration: Dual exit at rear bumper

      I'd consider a long tube header setup w/ high flow cats as well (I would like to maintain all emissions equipment) any suggestions there are also welcome. 

      I can always get a quote from a shop but I wanted to shop around first before I did that. 
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Forum Statistics

    234,354
    Total Topics
    2,492,604
    Total Posts
  • Member Statistics

    256,376
    Total Members
    8,960
    Most Online
    Thomas McCoy
    Newest Member
    Thomas McCoy
    Joined
  • Who's Online   50 Members, 0 Anonymous, 3,510 Guests (See full list)



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.