T1 Denali/High Country Cluster Retrofit Update

[GTPprix]

Hey Gang,

 

Just wanted to let everyone know that we've updated the cluster retrofit information on our website for the T1's to include applicable part numbers through 2020 including US Spec, Export (Canadian/KMH units etc) and Diesel Part numbers for 2020's. We hope to have pricing on the 2020 units soon so we can start offering those as well for those of you who aren't able to find any used/secondary market units

[Davidj98]

That's awesome, looking forward to doing this Mod too, thank you!

[FiatDale]

Thanks Chris!

This install was easier than the NNBS and K2.

[GTPprix]

16 hours ago, FiatDale said:

Thanks Chris!

This install was easier than the NNBS and K2.

You're most welcome! Glad we are able to finally get the new hardware at a relatively reasonable price to boot! These are so much easier than the older trucks, cant wait for someone here to do a HUD retrofit!

[FiatDale]

Working on it as we speak! Have all the parts, working on the harness now. It’s certainly not going to be cheap.

[GTPprix]

1 hour ago, FiatDale said:

Working on it as we speak! Have all the parts, working on the harness now. It’s certainly not going to be cheap.

But its gonna be sweet!!!

[lt1z]

Thanks Chris!

This install was easier than the NNBS and K2.

So this was complete plug n play with the pre programmed IDC? I have one already for my AT4 but have not gotten around to installing yet.

[FiatDale]

From WAMS yes it’s 100% plug and play. Dash is simple to take apart, takes 10 mins.

[lt1z]

From WAMS yes it’s 100% plug and play. Dash is simple to take apart, takes 10 mins.

Awesome. So you just remove the top panel on the dash, un bolt it and that is it? Nothing with the center stack or console?

[FiatDale]

No, top visor, left side panel with the headlight control and radio panel needs to come loose. It’s easy.

[REDDEVILMEDIC]

Where do I find this?

[FiatDale]

https://www.whiteautoandmedia.com

[batman900]

Very VERY cool mod and the price is not crazy.

[Smoothbassman]

Well, this is on my list for 2020!!

Sent from my SM-N960U using Tapatalk

[lt1z]

Installed mine today. Was easy. 15 min with a 7mm, plastic trim tools, and a torx bit.

One connector on the back and thats it