Sign up for FREE! Become a GM-Trucks.com Member Today!
In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience.
This project took me about 2 hours total. Please see the attached PDF for more photos and project details. I also included links to where I purchased my supplies. I can't say thanks enough to Smoothbassman, his input gave me the confidence to tackle this project. I am really pleased with how it turned out.
Price update 10/24/19
Replacement Projector LED Headlight in Black Housing Clear Lens. Includes Hikari LED low beam upgrade wired and ready. Plug and play.
This is a $500 setup that is ready to go. I got rid of the truck so no need for these anymore.
-Direct Bolt On Replacement For Your Original Headlights, No Wiring or Any Other Modification Needed.
- DOT & SAE Approved.
This is plug and play with:
2015-2019 Chevy Suburban
2015-2019 Chevy Tahoe
Compatible on Models w/ Factory Halogen Headlights Only.
One headlight has a light scratch but if you took to a professional detailer they could likely sand it a little and buff it away to look new. The one picture shows it on what would be the passenger side just to the right of the ELLED band. No impact on lighting and with some professional polishing would probably just disappear.
Has anyone had the dealer update their BCM on a 1500 to remove the bulb out detection system that causes the hyperflash?
I was told they could on 2500 and 3500 but couldn’t on a 1500.
I found this online which states the same I think (if I’m reading it right)
But, I feel like I’ve seen where others had this done on a 1500, but coming up short in searching it. So any details would help!
Im trying to put LED tail lights on my 2018 Silverado LT and really don’t want to add a bunch of resistors as I eventually want LED all the way around.
With the days getting shorter, I'm going to work in the morning when it's dark. I back into my space at work and it is really hard to see, my backup lamps don't put off a lot of light. I still have the incandescent bulbs in my 2018 GMC Sierra 2500HD SLT, has anybody upgraded or retrofitted to LED's ? I know with some to the older systems and LED replacement bulbs you had to install resistors, do you still need to do this? You can purchase just about anything in LED and they are they won't break the bank these days.
Has anybody performed this upgrade, if so what brand of LED's are you utilizing?
Are you only retrofitting the Reverse lamp bulbs?
What about the Turn/Brake and Running lamp bulbs, if you retrofitted them to LED, would they be too bright?
Interested in what others are doing.
Recently Browsing 0 members
No registered users viewing this page.
Most OnlineNewest Member
Who's Online 83 Members, 0 Anonymous, 1,976 Guests (See full list)
- john purcell
- Nick Jacobs
- jeffrey krawczyk
- George L
- Scott Amy
- nick Blackwell
- Raven Z71