Steering wheel controls not working 2007 Suburban

[Richard Santowski]

I just replaced the multi-function turn signal switch in 2007 Suburban 1500 because the high beams would go on every time I engaged the right turn signal indicator.  However, now that the new switch is working properly, I noticed that neither the steering wheel controls (volume, channel change, cruise control settings, etc.) nor the horn work.  I have seen some posts related to potential issue with the clock spring.  Before going down the clock spring replacement path, might there be an easier solution?  Is there a way to reset the clock spring without having to replace it?

[Jsdirt]

If the problem happened right after the MF switch replacement, I'd bet 10-to-1 a wire got pinched, or something was left unplugged, or a wire broke in half at a connector. I'd retrace your steps and take a close look at all the wires coming from those switches.

[Justin101714]

Those switches have one connector for all of them. If it’s not plugged into the clockspring, they won’t work, if it is plugged in and they don’t work, replace the clockspring. No way around it.


Sent from my iPhone using Tapatalk