Jump to content

  • Sign up for FREE! Become a GM-Trucks.com Member Today!

    In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. 

2010 Chevy Silverado 1500 WT payload

April Jones
 Share

Recommended Posts

swathdiver Senior Enthusiast

swathdiver

Posted
Posted
54 minutes ago, April Jones said:

Can I haul 2 full Ridgid job boxes in my 2010 Chevy 1500 WT? It's reg cab 4x4 with 5.3l V8. Also wanting to know what issues I could run into by overloading the bed

Regular or Long Bed?  If the former, somewhat less than 1705 pounds.  If the latter, somewhat less than 1802 pounds.  You have a sticker in the door jamb that tells you exactly how much, it's the Tire and Loading Information sticker.

 

Subtract the payload capacity from the GVWR (the other silver sticker) and you'll have the truck's curb weight as delivered with a full tank of fuel.  

 

If you really want to know, weigh the truck and then weigh it again with the boxes on board at your local CAT Scale.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

    • Tattoo magic
      (Update lift problem)Dealer installed 2” lift question
      By Tattoo magic
      I have a 2022 Silverado 1500 four-wheel-drive. The dealer ordered the 2 inch lift kit they offer and I’m waiting for it to come in and have it installed. But I noticed that the kit doesn’t come with upper control arms. Is that going to be a problem?
       
      (***UPDATE*** )
       
      so I had the factory lift gm offers installed. When I picked it up, it looked great but as soon as I went to drive it off the lot. I could tell something was wrong it felt completely different. I figured it was just a break in period. But even after a day or two, I was getting crazy bad vibration at low speeds. Took it back. They ended up putting one of the U-bolts on wrong (I have pictures if wanted) they fix that and told me the vibration was gone. I get my keys go to drive away vibrations right back. I turn right back around. this time they have a mechanic ride with me. He clearly hears  an feels a vibration, says somethings wrong so we turned around and he takes it back in. Three hours later they bring my truck back they had to remove the back blocks said there was no taper to them and it was messing up drive line. I got it back and the vibration is still there. (Now annoyed that only the front is lifted and still vibrating). I have them take the whole lift kit off. Put it back to stock. (Now remind you my truck has been down and I’m missing work for 5 days at this point) And after that Whole ordeal, I was done with the truck since I couldn’t have it how I wanted it and decided to trade it in and they made me a good deal on a 2023 5.3 LT.z71
       
      I know many have gotten this lift installed said it worked out for some reason it did not for me. I’m much happier with the new truck. 
    • Jgardow92
      Driver's seat leaning to the left?
      By Jgardow92
      I have a 2022 trail boss lt that has about 6100 mile on it now. Bought it brand new in may 2022 and it seems like the drivers seat leans to the left towards the door. Almost feels like Im gonna fall out of it and no matter how I adjust it it seems the same. Visually it looks like it sits level and is fine. Is it possible something is broken inside like the frame? I would assume the frame would have to be sturdy. Is there any place that sell a better bottom cushion?
    • Fredo1888
      L84 can I save it ?
      By Fredo1888
      My l84 5.3 cracked some pistons now thinking of doing a light hone but wanted to know if it would even save the engine ? The scratches are pretty light my nail doesn’t get stuck but I do feel em. The pours on the other hand I’m not sure what could have caused those little things ? 


    • MisterEhEDC
      2020 Silverado sway bar hitting CV axle
      By MisterEhEDC
      Hello all, My Sway bar was hitting my CV axle, as the title says. So I crawled under some trucks at the dealer to see what stock trucks are like and it turns out that the new TB/AT4's have longer end links then my 2020 TB. The new end link has a 3 inch rod vs the 1-3/4 inch OE part.
       
      The part number for the longer end link is P/N:85590925

       


    • Sir_Griglesworth
      Need help diagnosing noises coming from my 2020 Silverado 1500 5.3L
      By Sir_Griglesworth
      Hello everyone. I've recently purchased a 2020 Silverado 1500 from a dealership. I found out late in the sale that the truck was used as the dealerships "loaner" which didn't really bother me even though I know people beat up those vehicles. Anyway, I'm pretty in-tune to vehicle sounds and I had a couple of questions regarding noises I'm hearing from my vehicle. 
       
      The first is a clunking noise and a physical jolt when I shift from Drive to Reverse. I have my foot on the brake and am on a flat surface. I notice it a lot after I've been driving for a while and go to back into my garage. I took the truck back to the dealership and they chalked it up to bad U-joints. They slapped 2 fresh sets on, but I've still go the issue. Any ideas what it may be? I don't feel like anything is going to fail, but I also don't like the sound and don't think it should be that way. I have another service appointment next week and I'd like to help them out with ideas considering they don't really seem to care.
       
      The second is a ticking noise coming from the undercarriage. I' got under the truck today and believe it's coming from the rear portion of the engine, but I'm not for certain as I've never been beneath the truck while it's been on a rack. The noise cannot be heard when standing at the front with the hood up, but I can hear it very noticeably when standing at the driver's door. I do not hear it as the engine is heating up, but that could be because every other component under the hood is loud as h*ll while the truck is heating up. Once the engine is approaching operating temp, it's very noticeable. As you can hear from the short video, it's every .5 to 1 second or so and is always present during idling. Again, may not be a big issue, but I hate hearing things on my vehicles that I can't attribute to something else.
       
      Thanks for reading my ramblings. I can try to post longer videos if anyone needs. Thanks in advance!
      IMG_8898_Trim_Trim (2).mp4 IMG_8910_Trim (2).mp4

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    242k
    Total Topics
    1.4m
    Total Posts

  • Member Statistics

    309,156
    Total Members
    8,960
    Most Online
    Kellen Kemp
    Newest Member
    Kellen Kemp
    Joined


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept