Jump to content

  • Sign up for FREE! Become a GM-Trucks.com Member Today!

    In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. 

Raptor style grille for 2014 silverado??

aWelderZ71
 Share

Recommended Posts

aWelderZ71 New Member

aWelderZ71

Posted
Posted

Hello everyone. I've been looking for a raptor style grille for my '14 silverado 1500. I see ones online that I like but I can only find them for the 16-18 models. They have the 3 amber led's on top and "CHEVROLET" fairly large across the middle. For these, you can find them for 120-175 dollars.

The only raptor style grills I've found for the 14-15 chevy have the amber lights but no chevrolet across the front. I've also seen grills with chevrolet across the front but don't have any lights AND they cost 500-700 dollars and at that point, I would just stick to the stock grill.

 

Anyone have any ideas on where I could find this? or ways that I could maybe buy the blank grill with the lights and buy lettering somewhere separately and somehow attach them to the grill?

 

I've attached 3 pictures. The first one is what I want but it's not the right year. Second is what I can find for my year and 3rd is the one with no lights, but has lettering across middle for 600 dollars. 

 

Any advice would be awesome!

Screenshot_20200711-104934_Chrome.jpg

Screenshot_20200711-104954_Chrome.jpg

Screenshot_20200711-104918_Chrome.jpg

Link to comment
Share on other sites
CovetedStyle Enthusiast

CovetedStyle

Posted
Posted

So I have a cutting edge off road grill myself and if you want lights he can incorporate them into it.  His grill is much more expensive but the quality of it is 5 times that of most aftermarket . That whole portion that says Chevy across the center he can make light up with LEDs I have it in mine it’s pretty slick.
 

Link to comment
Share on other sites
aWelderZ71 New Member

aWelderZ71

Posted
  • Author
Posted
2 hours ago, CovetedStyle said:

So I have a cutting edge off road grill myself and if you want lights he can incorporate them into it.  His grill is much more expensive but the quality of it is 5 times that of most aftermarket . That whole portion that says Chevy across the center he can make light up with LEDs I have it in mine it’s pretty slick.
 

How much did yours cost?

Link to comment
Share on other sites
CovetedStyle Enthusiast

CovetedStyle

Posted
Posted
3 hours ago, aWelderZ71 said:

How much did yours cost?

Too much.. I have the LED 3 layer that I bought in raw form from him for just under $500.. I color matched the outer shell and first layer, the second layer I polished and had a custom candy copper powdercoat shot over and then the third layer and led cover plate have been chromed.. so right around $2200

 

 

Link to comment
Share on other sites
aWelderZ71 New Member

aWelderZ71

Posted
  • Author
Posted
11 hours ago, CovetedStyle said:

Too much.. I have the LED 3 layer that I bought in raw form from him for just under $500.. I color matched the outer shell and first layer, the second layer I polished and had a custom candy copper powdercoat shot over and then the third layer and led cover plate have been chromed.. so right around $2200

 

 

Holy ****** that is pricey!  Looks awesome tho. ??

Link to comment
Share on other sites
CovetedStyle Enthusiast

CovetedStyle

Posted
Posted
2 hours ago, aWelderZ71 said:

Holy ****** that is pricey!  Looks awesome tho. ??

 

Yah a little over the top but he has much more reasonably priced grilles.. and he has a ton of different cuts he can do for the grille layer.. of you have IG get ahold of him on there, much easier to talk with about specifics.

Link to comment
Share on other sites
aWelderZ71 New Member

aWelderZ71

Posted
  • Author
Posted
On 7/12/2020 at 12:27 PM, CovetedStyle said:

Yah a little over the top but he has much more reasonably priced grilles.. and he has a ton of different cuts he can do for the grille layer.. of you have IG get ahold of him on there, much easier to talk with about specifics.

Thanks man!  I'll look into it. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

    • Jgardow92
      Driver's seat leaning to the left?
      By Jgardow92
      I have a 2022 trail boss lt that has about 6100 mile on it now. Bought it brand new in may 2022 and it seems like the drivers seat leans to the left towards the door. Almost feels like Im gonna fall out of it and no matter how I adjust it it seems the same. Visually it looks like it sits level and is fine. Is it possible something is broken inside like the frame? I would assume the frame would have to be sturdy. Is there any place that sell a better bottom cushion?
    • Fredo1888
      L84 can I save it ?
      By Fredo1888
      My l84 5.3 cracked some pistons now thinking of doing a light hone but wanted to know if it would even save the engine ? The scratches are pretty light my nail doesn’t get stuck but I do feel em. The pours on the other hand I’m not sure what could have caused those little things ? 


    • Ronjon
      Grounding accessories to Body or Frame
      By Ronjon
      I'm going to be mounting one of those 10.6cfm twin piston air compressors (maxi trac, morrflate, stop n go, thor) inside my cab for onboard air. My question is can I ground it to the body, should I run a bulk head and wire to the frame, or run it with the positive back to the bay and ground out on the frame there?
      It has a 90Amp peak draw and I'll be running 6 AWG wire, it will be fused and run through a switch box to a 200a relay. I know in the past people will ground winches to the frame or body, but with all the computer stuff going on I've got this concern on the back of my head.
       
      2020 1500 Silverado LM2
    • MisterEhEDC
      2020 Silverado sway bar hitting CV axle
      By MisterEhEDC
      Hello all, My Sway bar was hitting my CV axle, as the title says. So I crawled under some trucks at the dealer to see what stock trucks are like and it turns out that the new TB/AT4's have longer end links then my 2020 TB. The new end link has a 3 inch rod vs the 1-3/4 inch OE part.
       
      The part number for the longer end link is P/N:85590925

       


    • oleSilverado
      Wanted Summit white front end
      By oleSilverado
      Seeking appearance package 2010-13 Silverado 1500 painted white grille, bumper with opening painted, bumper end caps with fog light openings all in summit white. May look at other colors also. Stock fog lights are not wanted. Also interested in a painted or silver lower valance where the tow hooks are located.

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    242k
    Total Topics
    1.4m
    Total Posts

  • Member Statistics

    309,048
    Total Members
    8,960
    Most Online
    willisjh
    Newest Member
    willisjh
    Joined


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept