Jump to content
  • Sign up for FREE! Become a GM-Trucks.com Member Today!

    In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. 

patrickrivard

Auxiliary Accessory Trailer Camera (Connector)

Recommended Posts

What is that Auxiliary Accessory Trailer Camera "Connector" (Name, Part Number, where to get it)?

*** The actual black "Plug" with Blue O'Rings and a Rubber Cap that connect to the Camera Hookup port under the 7-way trailer plug***

See attached picture

 

On my 2021 GMC Sierra 2500 HD DENALI, I have the Auxiliary Accessory Trailer Camera option that includes the "Camera" itself to be installed in the back of the Trailer, but apparently GM decided that you would have to install the Camera Cable outside of the Trailer (Either on the top, the side or under it), because the "Connector" is "Factory installed" on the Camera Cable and would be highly "Prohibitive" to try to have that cable run inside of the Trailer for a certain length and exit at the front, due to the size of the hole one would have to drill to get that Connector to go through...

I have contacted my Dealer's Service department to ask for that "Connector" in order to be able to cut the "Pe-installed" and re-install a new one after the cable has been properly installed.

But they told me they had no clue as of what that connector was and apparently are not listed for that part...

Can you imagine if one "Damages" that connector for any reason whatsoever and needs to replace it... NO can do, you have to replace the complete "Camera Kit"!!! Really, GM, way to go...

 

My Question to you guys is would any of you have the information on said "Connector" and if so, could you pleas let me know what it is (Part Number, and where to get it).

Thank you.

PR

20200930_074556.jpg

Photos.zip

Edited by patrickrivard

Share this post


Link to post
Share on other sites

The cable can be removed from the camera which will make for a smaller end to deal with. there is a thread that discusses its removal. It may be this one: 

You might also be interested in this thread: 

 

Edited by Bob Riley

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.