Jump to content
  • Sign up for FREE! Become a GM-Trucks.com Member Today!

    In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. 

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Scotty33
      Hey all, sorry if this is the wrong area. 2008 Suburban 4WD here and I bent this weird clip on my u-joint, curious if I need to replace u-joint or not? I have 4 u-joints and only the one on the front diff has it. Very thin metal that I can’t imagine does much. New ones don’t come with it. What’s this things purpose? Can I just pull it and forget it? Never seen one of them before anyway.
       
      Thanks guys!


    • By ryabrams
      Hi all, new to the forum, but have been reading random threads.  I own a 2020 Trailboss, and my wife has a 2019 Suburban Premiere 6.2.
       
      I did some searching and couldn't really pinpoint any good discussions on this.
       
      I'm looking to add exhaust to the Suburban.  I was hoping to accomplish 2 things:
      1. Marginal increase in volume/sound, she wants people to know she's on the road
      2. "Dual" exhaust, however I can't seem to find any good pictures or systems that exist out there.  Honestly I don't even want/need the tips visible, it would be great to add a 2nd exit on the driver side, similar to what's currently on the passenger side.
       
      Anyone do/see anything like this or know of a system that exists?
       
      Thank you!
    • By Haroldbates77
      I have a 2000 yykon denali,new battery,alternator,light switch. When you shut the vehicle off and exit with keys,the headlights and tail lamps will sometimes flicker or illuminate. Can hear something like a relay clicking under the dash. Sometimes its all of them and sometimes just park lamps. Advise please.
    • By adrian rmz
      new to the forum i'm seeking some advise i have a 2016 suburban ltz with magnetic ride a few days ago i noticed it felt like it was bottoming out when driving down the road started reading up on it and people say when you go over 65k miles on them suspension gives out well mine has 91k on clock but what has me baffled is that there are no service warnings popping up on dashboard has anyone experienced this before any help is greatly appreciated before i go shelling out any cash  
    • By BenjaminD
      Being that the 91 Suburban is a square body I posted here in hopes of getting some help.
       
      I have a 4x4 suburban 1/2 ton I just overhauled the brakes. On the back brakes I replaced everything (All springs, axle brake lines, wheel cylinder, all new hardware including self adjustment wheel and kit and the wheel cylinder links) except the drums and the backing plate which I couldn't find a new replacement. 
       
      Please note also there is no parking brake cable at all, no parking brake strut or the arm that holds the cable.
       
      Three things I have done that could have contributed to the problem that I want to mention. 
      1.) The only replacement wheel cylinder links I could find were slightly longer. (The original ones were terribly rusted and there was no drag what so ever.)
      2.) I cheaped out and didn't get the rotors turned. They looked fine.
      3.) The backing plate tabs had grooves in them so I carefully ground them nearly flat as to not take an insane amount of material off.
       
      So I put everything together and adjusted the star wheel to where the pads were just barely touching the drums. With the wheel off, the drum did spin nice and freely. Though I suspect slight warpage.
       
      I drove to town about 7 miles away and back and everything seemed normal. Got out of the truck and smelled a burning smell and noticed the hub on the driver's side rear wheel was too hot to touch. 
       
      I jacked the truck up and the wheel could spin freely by hand going backwards, but forward it would lock up! 
       
      I took the tire and drum off and backed off the adjustment some, put it back together and once again it moved forward and backwards freely. Took it for another test drive and the same thing.
       
      I have ordered another set of pads because the ones I put on are heat damaged and ordered a new set of drums.
       
      I just can't figure out why they would lock up going forward and not in reverse. 
       
      I'm just fishing for ideas here, never seen anything like it.
      (Update): I lightly sanded the brake shoes and they look good as new. I got the rear end jacked up and backed the star wheels all the way to the closed position. 
       
      With the drum off on the driver's side, I lightly pressed on the brake and the rear shoe was failing to return to a closed position. I added extra lube and it appears to be functioning. But I still  don't feel confident the problem won't return.
       
      Anyhow,  I'm incrementally adjusting the star wheel by 50 clicks on each side and with the truck in neutral the wheels turn and I work the brakes. Put it in drive and reverse working the brakes. So far so good. Now making smaller increments in adjustments.
       
      If anyone knows where I can find brand new backing plates and the proper wheel cylinder links it would be much appreciated. I can't find them. I even called Dorman and they have nothing. It's a 91 ten bolt, 30 spline, 6 lug axle.
       
      I found a disc brake kit for around 400 bucks, but I feared having to change out the proportioning valve and master cylinder. I don't know that I would,  but am afraid to open that can of worms. Unless someone has did a rear disc conversion and can tell me otherwise. 
       
      I'm just wanting my brakes to work properly. It's a rusty old truck that's my daily driver.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Forum Statistics

    231,010
    Total Topics
    2,466,328
    Total Posts
  • Member Statistics

    231,562
    Total Members
    8,960
    Most Online
    Brandon Singleton
    Newest Member
    Brandon Singleton
    Joined
  • Who's Online   39 Members, 0 Anonymous, 1,437 Guests (See full list)



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.