Jump to content
  • Sign up for FREE! Become a GM-Trucks.com Member Today!

    In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. 

Need help diagnosing noises coming from my 2020 Silverado 1500 5.3L


Recommended Posts

Hello everyone. I've recently purchased a 2020 Silverado 1500 from a dealership. I found out late in the sale that the truck was used as the dealerships "loaner" which didn't really bother me even though I know people beat up those vehicles. Anyway, I'm pretty in-tune to vehicle sounds and I had a couple of questions regarding noises I'm hearing from my vehicle. 

 

The first is a clunking noise and a physical jolt when I shift from Drive to Reverse. I have my foot on the brake and am on a flat surface. I notice it a lot after I've been driving for a while and go to back into my garage. I took the truck back to the dealership and they chalked it up to bad U-joints. They slapped 2 fresh sets on, but I've still go the issue. Any ideas what it may be? I don't feel like anything is going to fail, but I also don't like the sound and don't think it should be that way. I have another service appointment next week and I'd like to help them out with ideas considering they don't really seem to care.

 

The second is a ticking noise coming from the undercarriage. I' got under the truck today and believe it's coming from the rear portion of the engine, but I'm not for certain as I've never been beneath the truck while it's been on a rack. The noise cannot be heard when standing at the front with the hood up, but I can hear it very noticeably when standing at the driver's door. I do not hear it as the engine is heating up, but that could be because every other component under the hood is loud as h*ll while the truck is heating up. Once the engine is approaching operating temp, it's very noticeable. As you can hear from the short video, it's every .5 to 1 second or so and is always present during idling. Again, may not be a big issue, but I hate hearing things on my vehicles that I can't attribute to something else.

 

Thanks for reading my ramblings. I can try to post longer videos if anyone needs. Thanks in advance!

Link to comment
Share on other sites

12 minutes ago, Transient said:

Tell us more about the truck, please.  Engine, trans, etc

I'm not sure what else to share, I'm sorry. Truck has 68k on it, I've put 2.5k on it since purchasing. As I mentioned, it's a 5.3L V8. I've not yet done a tranny flush although that's on my list of things to do in order to make sure the truck is at baseline maintenance. Is there any other specific info you need?

Link to comment
Share on other sites

On 1/4/2023 at 9:20 PM, Sir_Griglesworth said:

Hello everyone. I've recently purchased a 2020 Silverado 1500 from a dealership. I found out late in the sale that the truck was used as the dealerships "loaner" which didn't really bother me even though I know people beat up those vehicles. Anyway, I'm pretty in-tune to vehicle sounds and I had a couple of questions regarding noises I'm hearing from my vehicle. 

 

The first is a clunking noise and a physical jolt when I shift from Drive to Reverse. I have my foot on the brake and am on a flat surface. I notice it a lot after I've been driving for a while and go to back into my garage. I took the truck back to the dealership and they chalked it up to bad U-joints. They slapped 2 fresh sets on, but I've still go the issue. Any ideas what it may be? I don't feel like anything is going to fail, but I also don't like the sound and don't think it should be that way. I have another service appointment next week and I'd like to help them out with ideas considering they don't really seem to care.

 

The second is a ticking noise coming from the undercarriage. I' got under the truck today and believe it's coming from the rear portion of the engine, but I'm not for certain as I've never been beneath the truck while it's been on a rack. The noise cannot be heard when standing at the front with the hood up, but I can hear it very noticeably when standing at the driver's door. I do not hear it as the engine is heating up, but that could be because every other component under the hood is loud as h*ll while the truck is heating up. Once the engine is approaching operating temp, it's very noticeable. As you can hear from the short video, it's every .5 to 1 second or so and is always present during idling. Again, may not be a big issue, but I hate hearing things on my vehicles that I can't attribute to something else.

 

Thanks for reading my ramblings. I can try to post longer videos if anyone needs. Thanks in advance!

This is certainly not what we like to hear, Sir_Griglesworth.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2020 Silverado 1500. To do so, please send an email to [email protected] with ATTN: Sir_Griglesworth/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s Privacy Policy, please visit https://www.gm.com/privacy-statement.html. The information you provide may be monitored and recorded and is subject to the GM Privacy Statement.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Content

    • By 01Silverado2wd
      hello gm-trucks commuinty i’m having issues with a smog readiness monitor not completing. any information on this issue would be greatly appreciated. my truck is a 2001 Chevy Silverado LS 1500 with a 5.3L v8 and it’s 4x2. all the readiness monitors complete except the secondary air system causing the truck to fail smog in california. i’ve heard the air pump turn on at cold starts and even replaced the passenger side check valve. also replaced the solenoid that sends vacuum. everything in the secondary air system seems to be operating properly but the monitor won’t complete. i’ve driven 100s of miles and done countless cold starts but no luck. even the smog referee said the system is working properly and i should just drive the truck more. anyone else experience this issue and what did you have to do to complete the monitor? there are no codes stored currently and the truck runs fine. thank you to anyone that helps
    • By Arturoej8
      Hello I have a 2018 Silverado (6l80) I’ve recently had my transmission rebuilt along with a billet converter installed about 6 months ago. Truck runs fine but I’ve noticed my temperature get up to 200-220 when at idle. Once I hit the road it drops down between 170-190, when running on the highway I’m at 150-170. I’m also running a sure cool for the thermostat. Any idea why it would get up to those temps during idle ? 


    • By Tattoo magic
      I have a 2022 Silverado 1500 four-wheel-drive. The dealer ordered the 2 inch lift kit they offer and I’m waiting for it to come in and have it installed. But I noticed that the kit doesn’t come with upper control arms. Is that going to be a problem?
       
      (***UPDATE*** )
       
      so I had the factory lift gm offers installed. When I picked it up, it looked great but as soon as I went to drive it off the lot. I could tell something was wrong it felt completely different. I figured it was just a break in period. But even after a day or two, I was getting crazy bad vibration at low speeds. Took it back. They ended up putting one of the U-bolts on wrong (I have pictures if wanted) they fix that and told me the vibration was gone. I get my keys go to drive away vibrations right back. I turn right back around. this time they have a mechanic ride with me. He clearly hears  an feels a vibration, says somethings wrong so we turned around and he takes it back in. Three hours later they bring my truck back they had to remove the back blocks said there was no taper to them and it was messing up drive line. I got it back and the vibration is still there. (Now annoyed that only the front is lifted and still vibrating). I have them take the whole lift kit off. Put it back to stock. (Now remind you my truck has been down and I’m missing work for 5 days at this point) And after that Whole ordeal, I was done with the truck since I couldn’t have it how I wanted it and decided to trade it in and they made me a good deal on a 2023 5.3 LT.z71
       
      I know many have gotten this lift installed said it worked out for some reason it did not for me. I’m much happier with the new truck. 
    • By ChevyGirl777
      Hello, I have a 2017 Chevy Silverado 1500 4X4, 110,000 miles, was driving down the road and suddenly stopped moving, truck still on but won't move. Goes into drive and reverse but wont move. No check engine light, transmission fluid full, and clean, no crazy noises. Any clue what it could be? I have been told the linkage, or the transmission pump... Any advice is appreciated. 
    • By Jgardow92
      I have a 2022 trail boss lt that has about 6100 mile on it now. Bought it brand new in may 2022 and it seems like the drivers seat leans to the left towards the door. Almost feels like Im gonna fall out of it and no matter how I adjust it it seems the same. Visually it looks like it sits level and is fine. Is it possible something is broken inside like the frame? I would assume the frame would have to be sturdy. Is there any place that sell a better bottom cushion?
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    242.1k
    Total Topics
    1.4m
    Total Posts
  • Member Statistics

    309,440
    Total Members
    8,960
    Most Online
    Gary BASSETT
    Newest Member
    Gary BASSETT
    Joined


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.