Anyone Have A Tekonsha Voyager Brake Controller.

98silvz71 · October 16, 2008

I haven't towed this particular trailer in about a month or so, but since I have pulled it a couple times since then the little green light doesn't light up anymore when I am not touching the brakes. I looked over the trailer and haven't seen any wires cut or anything. I don't have another trailer with brakes to check it on either.

The brakes still work because the drums are hot and the red light comes on but as soon as I step off the brakes the light goes out again. I was kinda thinking that I'm losing power somewhere. Any ideas or maybe suggestions for me to try?

bigbengalbubba · October 16, 2008

Does the green light come on when you touch the brakes or just the red? Thinking maybe the green led is dead. Have you tried any of the adjustments on the controller. I believe there are two. One for power and one for sensitivity.

98silvz71 · October 16, 2008

Well they are the same led, just changes color. Normally when I have a trailer connected it shows green. And then when I step on the brakes the red comes on to show that I am braking for the trailer. Yea I don't think it has anything to do with the sensitivity of the controller. It never changes the intesity of the green one just of the red one.