'01 2500hd Brake Bleeding Procedure?

silveradojim · June 10, 2009

I took out the EBCM and all so I could take the module off. I sent it to ModuleMasters to have it repaired and put it all back in the truck. Since I took off all the brake lines to take the EBCM/ABS pump out, most (if not all) of the brake fluid drained out.

Can anyone give me a good description of the correct way to bleed the master cylinder, ABS, and brake lines?

Thanks,

Jim

bill190 · June 11, 2009

If no one knows, order a GM factory service manual set (3 or 4 books) from a GM dealer. This will give exact instructions and tell you of any special tools you might need. I don't know about your specific year.

On older years, you need to order 3 special tools which open up valves like the proportioning valve and two on the ABS.

Here is a web site which sells special tools like this and this is the tool for older vehicles...

http://www.toolsource.com/proportioning-va...77-p-61417.html