Search the Community
Showing results for tags 'long tube'.
Found 6 results
-
Might have a ridiculous question but I cant see the issue in theory so I am consulting the experts. I have a 2015 2500 HD 6.0 4x4. I recently had long tubes installed. First finding long tubes for this application is insane. I could not specifically find anything that guaranteed fitment for this year. I ended up with speed engineering stainless that was made for the 6.0 up to 2013 according to them it should carry over in later years which is true given the L96 has changed little to none. I had zero fitment issue with the passenger side but the left was awful...... hit the motor mount, frame, and drive shaft. I had the shop modify the header to fit......being honest he did exactly that and I'm impressed but I believe the header is leaking like nobody's buisness due to the 8 different cuts and bends he made. and makes an awful sound I do not feel like going through hell and back or spend the money on another long tube header for that side to run into the same issue...... so what if I ran a shorty 1 7/8 stainless on the driver side and a 1 7/8 long tube on the passenger side? It's off the wall but why not? If the true duals x and I have a custom tune in theory it should not be an issue right?
-
American Racing Headers Part number :GM62-14178300LSWC GM Truck 6.2L 2014-2019 Long System These have 150 miles on them. Like new! Cost $1,775 new. Passing a smoking deal on to you. Comes with all components originally sold as a kit from American Racing. ARH long tube headers long system for the 2014-2016 Chevy/GM Truck 6.2L features 304 stainless steel, 1-7/8" primaries, 3" merge collectors, and all the necessary hardware and gaskets for a bolt-on installation. The 2014 & Up GM Truck 6.2L ARH long systems were designed to bolt-on to your factory axle-back or any aftermarket axle-back. Some modification may be required. The American Racing headers require a crossover y-pipe assembly and have converters. Using the catted crossover pipe cause very little restriction and they help to control emissions. Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Hand-ported TIG welded inlets Optimized primary tube routing for superior fit and performance Merge collectors with scavenger spikes Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability -
Hey all, I have a few items I'm selling to make some room in the garage. These items fit a 2014+ GM 6.2L V8. If you happen to live in New England I can possibly come to you. This is why I'm selling the parts. Had the truck for a few months and a handful of lifters and pushrods S.T.B.. So I went down the rabbit hole :). Diablo Sport Trinity 2 EX performance tuner. $599 RETAIL. Selling for $399.00 obo (Only had for a few months on truck). Momentum XP 5R Cold Air Intake System. $512 Retail. Selling for 300. approximately 3,000 miles on it. Comes with recharge kit. Kooks 1 3/4 Long tube Headers. $1,389 Retail. Selling for $500.00 approximately 1,000-2,000 miles on them. Purchased May 2018. Texas Speed Performance 1 7/8 Long tube headers. $539 Retail. Selling for $150. approximately 500-600 miles on it. Purchased October 2018, truck broke Jan15ish 2019. OEM Radiator $50.00 obo OEM Pistons (8) $300 obo Cylinder Heads complete (pair) $500.00 (Cleaned, perfect for sending off to port, core refund or replacement). GM 6.2L camshaft. $80 obo. Pictures upon interest. PM if you are.
-
Hello Everyone Im looking for a set of Headers to Install on my 2015 5.3 Silverado, and came across this company with suspiciously low prices for stainless steel headers: Headers in question: https://www.speed-engineering.com/shop-by-vehicle/2014-2017-gm-trucks/exhaust/headers-y-pipes/silverado-sierra-1-7-8-longtube-headers-2013-4-8l-5-3l-6-0l-6-2l.html Has anyone had bought from them? what was your experience? A friend of mine has as LS3 Camaro and bought a set which looks pretty decent and sounds amazing, but im looking for more detailed opinions Help is appreciated, now here i some ear candy ! Thank you very much
- 21 replies
-
- 1
-
-
- speed engineering
- longtube
- (and 2 more)
-
Might have a ridiculous question but I cant see the issue in theory so I am consulting the experts. I have a 2015 2500 HD 6.0 4x4. I recently had long tubes installed. First finding long tubes for this application is insane. I could not specifically find anything that guaranteed fitment for this year. I ended up with speed engineering stainless that was made for the 6.0 up to 2013 according to them it should carry over in later years which is true given the L96 has changed little to none. I had zero fitment issue with the passenger side but the left was awful...... hit the motor mount, frame, and drive shaft. I had the shop modify the header to fit......being honest he did exactly that and I'm impressed but I believe the header is leaking like nobody's buisness due to the 8 different cuts and bends he made. and makes an awful sound I do not feel like going through hell and back or spend the money on another long tube header for that side to run into the same issue...... so what if I ran a shorty 1 7/8 stainless on the driver side and a 1 7/8 long tube on the passenger side? It's off the wall but why not? If the true duals x and I have a custom tune in theory it should not be an issue right?
-
On monday Im taking on the job of installing Pacesetter long tube headers before I get my true duel exhaust put on (new exhaust cause the flowmaster system I have is rotting out) and I figured if im going the route of true duels and where I live not having much to say upon running no cats, I would install long tube headers. Now Ive read the articles on here about dont attempt it if you have higher miles (kilometers where I am) but Im going to attempt this monday when my headers arrive in. Does anyone have any input, tricks, help, or useful knowledge towards doing this? Has anyone done this, I have 140,000 km's or Roughly 87,000 miles. I understand the big issue is breaking a bolt or say most of them off.. so other than soaking the hell out of the bolts with liquid wrench, any other knowledge to help ? Anything is greatly appreciated. Oh and after the headers and exhaust are installed I am getting a custom tune to delete the post-cat O2 sensors and a general tune.
