Search the Community
Showing results for tags 'headlighs'.
Found 9 results
-
hello I hope you can help me, I had a problem with my Chevy Silverado 2019 LTZ I changed the battery and after that my headlights stopped working, the right low beam works but the DRL does not work and the turn signal does not work either, on the left The opposite happens, the DRL and the turn signal work perfectly but the low beam does not turn on, on both sides the high beam works perfectly as well as the fog lights.
-
Have a 2020 GMC 2500 hd AT4 , and had it leveled, the headlight are now naturally aimed higher, and I’m getting flashed constantly. Is there any adjustment to aim the headlights on this truck? Also does anyone know if there is any aftermarket fog light bulbs or lights available to replace the stock ones that are worthless?
-
Looking to replace the headlights on my 2015 Sierra Denali but most of the headlights I’m finding say they aren’t compatible with trucks that have factory DRL’s. Has anyone replaced their headlights with one of these that say or have you found a pair that are compatible? I really like the 2016+ LED Headlights but don’t want to drop $1,000+ on them. Thanks for the help! -
98 Sierra 1500 5.0 vortec 4x4 SLE ext cab 295xxx Ill try to keep this short, any help appreciated thx in advance. My front signal and head light started doing all sorts of weird things head lights flashing with 4 ways, left signal wouldn't work with head lights active. The interior lights where acting weird. Work sometimes. The cluster gage illumination would not turn off. And there was nothing to rear rail or third break lights. Also some funky noises coming from the combo light relay So I thought it was ignition harness, cluster,dimmer switch relay. All fuses where fine. But my cig lighter fuse keeps blowing. So I went to junk yard and grabs some parts. So I tested battery and all the grounds I could find and cleaned them. As a changed parts nothing changed. So I was checking the wire harnesses and found that on the wires that runs back to rear of bed on driver side frame was melted up in spot and arking against the frame. So I patched the wires. Now the truck wont start and no lights will work. If you press break peddle the signal light on cluster light up. But not actual signal lights and if u try to turn fan on it turns the signal lights on cluster on and as ur turn it up the lights get brighter and my interior light on driver side floor won't turn off. All fuses seem fine beside the cig fuse. I'm out of guesses. -
So i have a Chevy 2500HD 6.0 High Country, and I was driving the other day and went to turn my high beams on and noticed they would not come on. The light in the dash comes on, and I can hear a click under the hood, but nothing. Replaced the fuse under the hood for the high beams, and changed out the bulbs with new ones, still not working. These are not projector headlights, there are individual bulbs for Lows, Highs, and Fog Lights. So when the high beams did not come on I tried my Fog Lights and nothing. Light in the dash comes on, changed the fuse and nothing. Any ideas on what to try next on this issue. -
So i have a Chevy 2500HD 6.0 High Country, and I was driving the other day and went to turn my high beams on and noticed they would not come on. The light in the dash comes on, and I can hear a click under the hood, but nothing. Replaced the fuse under the hood for the high beams, and changed out the bulbs with new ones, still not working. These are not projector headlights, there are individual bulbs for Lows, Highs, and Fog Lights. So when the high beams did not come on I tried my Fog Lights and nothing. Light in the dash comes on, changed the fuse and nothing. Any ideas on what to try next on this issue.
-
Low beam and high beams randomly stopped working other day on my 2015 Sierra 1500. All the grounds and fuses have been tested for power and they are all fine. All my other lights including parking, turn signals, taillights, hazards and fog lights work fine. Could it be the BCM or am I missing a fuse panel or ground? -
Hello! I am new to the forum game, but I didn't find a thread about the issue I have. I have a 2014 Sierra Denali with a 2018 exterior. The issue I have is that the headlights will go out after a few seconds of starting the truck. The lights will stay on indefinitely while the truck is off but after like 3 seconds of starting it, the lights will flicker once quickly and then go out. Scanner can read the signal from the switch getting to the bcm but the lights stay off. To make things stranger, the high beams work just fine, I can turn them on even after the lows go out but only the highs stay on. Is anyone having a similar issue? TL;DR - 2018 Headlights on 2014 Sierra go out seconds after starting the truck. While truck is off they work fine. Highbeams work fine. Help. -
Took my 2017 silverado 2500HD to chevy to have them reprogram my BCM. (truck came from canada and you cant turn off the light unless your in park! Safety thing canada does) But, the service tech said he cant SWITCH OUT my BCM because it's Vin'ed to the vehicle which I understand, but I wanted him to reprogram it which he said he can't do!? Does anyone know if this is true or how I can get this done?
