Skylardog123

So i have an 04 silverado, was doing some electrical work and i accidentally dropped a wire on the ground post and it sparked, next thing i know the truck wouldnt crank with the key unless i jumped the starter relay, the blinkers stopped doing anything, not even the indicators on the dash would light up, but the hazards worked, the tachometer was going nuts, and the AC compressor will not turn on, replaced and flashed the PCM with a new one and the truck finallt cranks and tach is back to normal, but the AC and blinkers still dont work, ive checked all ac and turn signal related fuses and all are good, freon is full and properly charged, what gives, also installed a new multifunction switch for the blinkers and no luck, any suggestioms are greatly appreciated

so i have an 04 silverado 5.3, here lately my guages will just randomly all drop to 0, low fuel light will come on, the line under the prndl indicator dissapears, and also voltage guage has been reading low, like 9.5-10.5v, whenever this occurs, i lose communication with pcm, my tuner was trying to tune my truck and halfway through the read, the guages died, and he lost communication with hptuners, so we had to bench tune it, the truck still starts and drives fine, i have an aftermarket radio with pac interface, but i pulled the radio fuse and it still does it, pulled radio harness and it still does it, its random though, not exactly like a loose wire because i can just be sitting absolutely still and the guages sometimes still shutoff, sometimes happens while im driving, any ideas what this could be? before the loss of communication brings me more issues, i was personally thinking maybe a shorted out BCM considering the canbus system is connected directly to bcm, or any other modules connected to class 2 serial data, someone please help with this