Demarcus Body
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Articles
RPO
Store
Blogs
Everything posted by Demarcus Body
-
& no I have not yet installed the lowering springs yet currently rn it’s still at a 2/6 drop with spindles in the front this weekend I planned on doing the springs to make it a 4/6 that’s why I was asking u guys before I put them on -
The ball joint has already been shaved down on both sides when I replaced the lower control arms & the rims are stock gmc 18’s on 255/55r18 coopers nothing is aftermarket at all about the setup
-
The tire size is a 255/55r18 do u think they will clear with the 2 inch spindles & 2 inch springs together because before when i was replacing the front end with new control arms I ran into problems with the lower ball joint scraping the rims when I had 17’s but the 18’s fixed that problem I just want to make sure everything is good before I put the springs on
-
So guys I have a 2001 Chevy Silverado extended cab it’s currently on a 2/6 drop but I bought some of the bell tech pro coil springs that’s going to drop it another 2 inches in the front with my 18’s will they clear or will I run into more problems please someone get back to me
