I have recently acquired a single cab 97 K1500. In my endeavor to get the power mirrors working, I have ran into a cascade of issues. Starting out, I found the fuse missing for the power mirrors. I replaced the fuse and the mirrors work now. Of course, the fuse controls interior lights as well. Shut the doors to celebrate my victory and noticed the interior lights still on. My only guess is the fuse was pulled to keep them off. Checked headlamp switch dimmer, not the cause. Moved to door ajar switches. Just went ahead and replaced them considering I destroyed them getting em out. No change. Thought I would try the dome override on the headlamp switch. It didn’t work. This led me to replace the headlamp switch. Now the override switch works and turns interior lights off when it’s pushed. Here’s where it gets gray. With the truck running, I shut the doors and the interior lights go out as intended. Open door and they come on. All is well and operating properly. Thought “hmm must of worked itself out” and turned the truck off and shut the doors to go inside. Well, well, the lights were still on. So, now my current situation is, interior lights operate properly with truck running and operate improperly when truck is off. Could this be an ignition switch problem considering the interior lamps work properly while the ignition is in the on position and not when it’s in the off position?