Search the Community
Showing results for tags 'head lamps'.
Found 2 results
I have a 2001 Silverado 1500, 5.3L 4X4, the headlights will not come on using the dash switch set to manual operation. No hi or low beams. The parking lights do work with the dash switch when turned on. The headlights come on with the ambient light sensor just fine. Hi and low beams work. Flash-to-pass option works. Tried 3 different dash headlight switches with the same results. Tried 5 different relays in the headlamp position in the under-hood fuse block, with same results. All other fuses in the under-hood block look good with no breaks. Pulled under-hold fuse block apart and all connectors look clean with no corrosion. No lose wires found. At my wits end with this. I have the wiring diagram and the only other possible thing I can think of is the headlight relay in the Body Control Module may be the issue, as that seems to be part of the circuit. This type of vehicle wiring is all new to me, and I'm just not sure why the ambient light sensor route and the Flash-to-pass option works, but not the manual switch, if the BCM headlight relay is bad? I'm hoping someone has worked on this issue and has a fix. I don't want to go the cost of buying a replacement BCM only to find that is not the issue, and I'm starting to think that bypassing all that and running a jumper wire to the headlights may be my only solution. Thanks all for your time, it is greatly appreciated.
I wanted to get the pulse of how many people have successfully had their Denali/LED headlamps painted? I am very interested in doing mine but have 2 major concerns due to the cost of these OEM lights: - Is it REALLY possible to get these re-sealed adequately to the point I should have little to no concern of condensation ever occurring after spending some serious money to have these painted? - Speaking of serious money, what is a reasonable amount to expect to pay? I know you can infinitely increase the cost of these projects by adding different LED switchbacks, different projectors, doing intricate paintings vs. just satin black everything, etc. What I'm wanting falls somewhere in the middle. I want to upgrade the LED switchback module (bc why not if I'm already in $$$ to crack them open?) which runs around $150 I believe, and I want a simple Satin black + (maybe) a portion color-matched as well (still on the fence) as well as the GMC stamped in the chrome of the headlamps to be the red color of the emblems. Does anyone have any input/feedback/advice/recommendations on this? If I have it done, I'd potentially be willing to send them off to someone to have them done, but shipping is a major added cost. Is there anyone in on of the following locations (that is highly recommended as well as reasonable??): Houston, TX - Where I live Austin, TX San Antonio, TX Dallas, TX Ft. Worth, TX Baton Rouge, LA Oklahoma City, OK Any and all comments are highly appreciated!