THE_Engineer

JayTee, Currently I don't have a tune, I have not noticed any major loss of power. I highly doubt you will see a big difference between your 33's and a 35. I know a couple of people running 35's with the same rear end and they have not had any issues. Let me know if you have anymore questions and Skennel I will try and post some pics of the trimming as soon as i can.

The tires do rub the sway bar at full lock and i trimmed the inner fender so i haven't had any issues with it scrubbing there. I have gone over plenty of speed bumps and never had any issues there, I have also been up to my hunting camp and went down some mild dirt roads with no issues. Ride quality is not quite as smooth as a highway tire but that was expected, i am 100% happy with the decision. These are 11.50 wide though, if i would have went 12.5 wide the only difference would have been the tires would have hit the sway bar sooner. Next time i buy tires i probably will just go with a 35x12.5 just because there are a lot more tire options.

Sorry i totally forgot to post pictures, I just took these pictures outside of work but I will take better pictures and better angles later and post. Not really sure how to post pictures on here so I just posted them to my profile then put the link below.

Just got tires installed, 35x11.50 fit perfect, there is a little bit of rub at full lock but that was what i expected. Its currently raining but i will take pictures tomorrow and post.

Ok i have decided to go with the 35x11.50 Nitto trial grapplers. Taking an extra inch off the width should help with the rubbing and make the wheel well modifications minimal. I will post pictures as soon as they come and i get them put on. Thank you all for the information

Thanks Lgetz for the info, I know it's possible but I'm not to sure if it will look good or not. I'm not scared to hammer some of the fender well. Did the truck you saw with the 35 inch tires look good?

The only thing I'm really worried about is the sway bar because it's easy to fit 275/65r20 on a 2.5 inch lift and the big difference between that and 35x12.50 is the tire width.

I'm wondering how much trimming would be necessary because I have seen a couple of people running 3 inch leveling kits and 35" tires with minor triming as long as you stay with the stock rims

Has anyone installed 35x12.50 tires under a RC 2.5" lift kit? I know it will rub but i am curious if anyone has attempted it. Thanks in advance for the help