Fullbooooost

I figured that would be the case, was hoping they were on a different pin in the harness. I'm not trying to illuminate the entire parking lot overtime i unlock the truck with those things. i just ordered the diodes off eBay. hopefully will have them by the weekend

Quick Question, needing to do this mod and I'm thinking of just using a wire to have them go on in reverse and when i hit cargo lights. The thing is i have factory installed Max Trailer mirrors with the LED lights. will these go on in reverse and when i hit my unlock button?

So you took off the supplemental clamps and just tightened your U-Bolts? and mine are at 30-31 psi but its also only 2 degrees currently

1) in front axle 2)Placed them about 6" in front of the axle 3) I didn't use a TQ wrench, just till I had them tight and the assist spring under load 4) Shocks - Standard/Stock Shocks 5) 4wd 6) Cab style and bed length- Extended Cab/ Standard Bed 7) empty bed 8) The springs seem to have definitely helped, truck seems soother at all MPH but it did not completely remove the vibration i had at 60-75mph. I'd say it was about a 80% reduction. 100% WORTH IT and a lot better than it was 9) I did not try in rear of the axle but my truck does have the Max Trailering Package so idk if i have different shocks or rear leafs in the back compared to a standard truck Pics Heres the clamps i used from AutoZone for 16.99 And this is where they are on the truck

Thanks for the info. Just stopped by auto zone and picked them up from there. Will install and report back Thanks for the info. Just stopped by auto zone and picked them up from there. Will install and report back

I plan on doing this in the next day or so, ill report back with my findings. just to make sure i get the right clamp what size do i need?

Yeah i ordered form them, got mine in great condition. You should feel safe buying from them

Today i was able to plastidip my rear emblems to match my black front bowtie, also installed my RC 2" Level today and I'm extremely happy with the results just have to get it into be aligned Next on the list is to paint match my bumpers, anyone have a estimate on pricing?

My AMPS came in yesterday and i had the time to throw them on before my new years eve party. First install on the truck and first time installing any running boards let alone electronic ones. took me about 4 hours total, between cutting mounting and wiring them all up, showed my friend whose family owns the dealer that i bought my truck through and he was quite impressed with how clean and fast the boards were I had no uneven gaps like I've seen people complain about. the only thing i notice is on the drivers side when they are retracting the rear of the board gets up a little faster then the front.hardly noticeable but has anyone else noticed this on theirs?

Does anyone have a coupon code for AMPS from ourdealsrock.com ? my GF is buying me a set for Christmas and they have the best deal i could find so far