Boltman21

My opinion off experience. I have a 3" level on front, stock on back. 305/55 tires with rubbing before trim and rubbing at full lock reverse after trimming. On most tires 305/55 are 33.2 diameter. 33 are around 32.8. With a 2" level I would suggest 33's. In regards to offset it gets tricky. The more negative you go the more you will stick out past the fender and more likely to rub. I went with -20 offset on a 20x10 rim and couldn't be happier (you can see most recent pictures of mine on page 232). Rub is hardly noticeable now and well worth the look I got. Good luck on your decision.

Bit of clearance work. Removed fender plastic trim. Unscrewed and pulled back felt and had to bang the back of wheel wheel a bit to give it more clearance with a rubber mallet. I think like maybe 1/4 inch. After I cut off bottom of plastic piece for even more clearance. After reassembling it looks untouched with felt and plastic cover.

Sure do. Took this one the day I got my wheels and tires installed. -20 off set was key in pushing mine out (aggresive look I wanted) Increase chance of rubbing on turns though. Thanks buddy.

Measured from pavement to center of fender (top center over wheel) front is exactly 1/4" higher in the front vs rear on mine. Looks exactly level to the naked eye though.

Thanks buddy. Honestly ride feels the same to me. Occasionally feel the difference on bigger bumps (stiffer) but otherwise feels the same the majority of the time. I do have stock UCA's. I'm happy with the 3" as my truck looks exactly leveled.

Posted a few months ago. I'll post again since I am so happy with this thing. Fuel Maverick 20x10 -20 offset 305/55R20 BFG KO2 3" maxtrac level on front / stock on back *Slight rubbing when reverse at full lock.

Posting an updated pic of my front end facelift that was inspired by my new rims. I'm really happy with it. All took about an hour to take apart and put back together. Anzo u-bar headlights (4k/55 watt phillips ultravision HID bulb swap, almost went brighter but didn't want to be that jerk that blinds people in cars in front of me) Black overlay on grill. Plastidipped bowtie emblem. BEFORE ON TOP

The Anzo are already setup with H7 but lots of reviews say they aren't very bright. Just doing a swap (pug and play) to better ones. Several videos on YouTube have guys doing it on those headlights. I'll definitely research some more in regards to that happening. Thanks for the heads up.

My truck is 2wd.,When I pull back felt, full turn lock, my tire barely cleared the metal. On mine zip tie wouldn't have done much. I was stuck between the Fuel Maverick D538 (black with machine accent) & D537 (machine face with black lip. Went with 538 and just ordered some Anzo ubar headlights in black. Will be putting HID bulbs in low beams. Swapping out my all chrome grill for chrome with black overlay and black bow tie. Ill be switching out the gold tail gate bow tie to black as well. (the little things, ha). Choosing these rims gave me a few more ideas. I'll post a pic when installed.

My truck is 2wd.,When I pull back felt, full turn lock, my tire barely cleared the metal. On mine zip tie wouldn't have done much. I was stuck between the Fuel Maverick D538 (black with machine accent) & D537 (machine face with black lip. Went with 538 and just ordered some Anzo ubar headlights in black. Will be putting HID bulbs in low beams. Swapping out my all chrome grill for chrome with black overlay and black bow tie. Ill be switching out the gold tail gate bow tie to black as well. (the little things, ha). Choosing these black rims gave me a few more ideas. I'll post a pic when installed.

After going through several posts on here and researching quite a bit (tire size, tire weights & tire dimensions, level kits, etc.) here is my setup. I was undecided between 305/55 vs 33x12.5 (bit more height vs bit more width in relation to amount of rubbing). I wanted to go aggressive as possible without losing too much comfort on ride. Mud terrains look great however eventually were not an option considering this is my daily and I never go off road. More then happy with how it looks. Love these tires + rims combo. Interestingly enough I wanted to go 20x9 +1 offset however the place I got my set from said Fuel was on backorder on that size and this rim color until February. I'm glad I went with the 20x10 since it gave me the lip on the rims and looks more aggressive. Pretty good rub initially however I trimmed the plastic piece at bottom back of front fenders along with a little tapping of the metal underneath the felt. Barely rubs at full lock in reverse. Rubs so little that once tires wear down a bit it no longer will. Hope this helps someone out there. Fuel Maverick D528 20x10 -20 offset 305/55R20 BFG KO2 3" maxtrac level on front / stock on back *Slight rubbing when reverse at full lock.