carnut325

Don't you have the connector on the wire harness for the heated steering wheel. The one that is taped over on a wire harness right near the steering column

Yeah I know. I looked at an Infiniti Q30 $39,000.00 No option for heated steering wheel. I told the dealership that was a deal breaker. Can't live without it if you live in the Northeast !

My dealership doesn't have just terminals they only have pigtails any help out there

Ok sounds good Thanks for the help I'll check at my dealership

Do you have any extra terminals you would be willing to sell ? I could pay you through paypal.

Are you sure these are the right terminals ? One is for 16-18 awg the other is 20-22 awg

Hey how did you make out? Did you fix your steering wheel?

OK thanks Enjoy

Might pay you to make this wire for people who need it and sell them

Do you have both terminals and could you send me one of each for $10

I think this will work. Check it out http://www.justparts.com/Auto_Parts/10-12-Chevy-Equinox-Auto-Dim-Onstar-Rear-View-Mirror--3031/26371658

AAAAH The sweet smell of success!

That's awesome. I'm going to do that. Could you list the 2 terminals and where you bought them. That would be a lot of help. Great presentation by the way Thanks

I think we found out if you have the adjustable pedals the wire is there. I didn't have one on mine so I just used a fuse tap. But I like this find and I think I will rewire to the back of the fuse box. Good work Justin

Did you do this and did it work? just add one wire the other wires are there?

Just sold my old steering wheel and clock spring on Ebay for $200 total So it cost me less than $100 to do this mod. AWESOME!

The date was 2015 on the transmitter. I don't think that matters. Good luck

That's awesome. My next upgrade is install electric cutout y to a loud muffler on one side and the stock muffler on the other side. This way I can control the volume of the exhaust. and have dual exhaust. Going to try to use the sunroof switch in the overhead console to open and close the valve.

Ok here goes.. Good news Just received my console from Ebay Salvage yard console. $75 shipped Installed Drove down the road to program the HL and BANG in 5 seconds was programmed. Drove back to my garage---pressed the button and the door opened. Pressed again it closed. Success The consoles from Priority...... are faulty. Time for my next upgrade..

might be cheaper or just as cheap buying the whole console new. You have to buy 4 parts if you do the upgrade piece by piece: wire harness-homelink-trim plate-buttons. then you could sell your old console on ebay for a couple bucks. Also Just received a mailer from GM If you have a GM card. It states "Spend over $100 on parts at your GM dealership get $100 off your purchase" Sounds to good to be true but I'll check it out.

Then you would agree they should work The second 12v is for the little button lights so you can see them at night. That endorses my belief that the ones we are buying on Ebay from Priority...... are faulty. So I will buy another one from a Salvage dealer and try that. Thanks for your help. I trust your knowledge and appreciate your input when it doesn't really benefit you. I'll post my results

Did your truck come with any extra option packages from the factory. If so which ones.

You see the difference We are installing HL into trucks that didn't have the option from factory. Remember the heated steering wheel install ---- trucks with out pedal package didn't have the 12v in the plug for steering wheel Could be the same scenario. Might be the switched 12v is missing so you just can't add it plug n play. It would be nice if someone would find the pin layout of the main connector to the console and note what that other wire (not the ground or 12v constant) actually does..Or just test the one in their working HL to see when or if it is energized I will eventually figure this out. But I think if we all work together on this we will get it figured out. Just like the other installs on this site.

If this is true Maybe we don't have the switched 12v in our trucks just the constant 12v and that is why it will not learn. I thought the switched 12v was for the LED lights on the buttons for at night

Did you install your HL or was it in from the factory. Some hand held transmitters don't transmit as long as you hold the button down. For those you have to press-release-press-release as long as it takes or they turn off after a few seconds.