OK, got the Weather Tech Alloy Tonneau cover. My wife and I installed it in approx. 3 hours. We are both 70 years young, and although a bit rough on the knees and back, we had little trouble. The "drill guide" provided by WT as a bit difficult to maneuver into the correct hole, as there are the square holes in the carbon fiber next to the round holes that need drilling through the plastic cap. Once we figured out how to get the guide in the right place, the process became easier. The "U" clips went in through the existing square holes with a little extra effort from a flat head screwdriver to line up with the round holes. The side rails went on pretty easily, but the bolt heads were to close to allow my sockets to fit. I had to use the open end 10mm, which added to the time required. Installing the cover was a breeze (I did that by myself under my wife's careful observation.)