David Hartsoe

The striker only goes up and down. Won't adjust in and out.

How do i adjust the driver side door to close further in? It sticks out 1/4 to 1/8 of an inch from the passenger door. If I close a dollar in the door and pull it out on the driver side front door it has little to no resistance like on other doors.

Temp coming out the vent is in the 60's, scan tool says reading out of some of the vents is negative 40 degrees.

Windshield temp says 32 degrees when it's 85 outside. Shows interior duct temperatures of -40 degrees. It gets cool in the truck but not cold. Heat works fantastic. It's dual zone the.p if it matters. Head pressure looks to be correct. Line going into firewall is cold and dripping. Compressor kicks on just fine.

Dealership says compressor is bad and wants 1400$ to replace it. Snapon scan tool says all HVAC readings are negative 39 or negative 40 degrees. I suspect there is an HVAC control module that needs replaced but need help diagnosing.