Cindershaw

So, went through the grounds that I could find including the two on the frame down the drivers side of the truck. No dice.

Thank you guys. I planned on checking grounds tonight when I get out of work. I’ll post an update after I check them out!

Yeah, my #4 lifter took out a cam lobe so I had to replace it all. I am using a Diablo Sport Predator II to tune out the AFM. I left it with a stock tune with AFM disable. I would assume that it should be ok? Is it safe to run in park if I put the stock tune back fully and start it? I fear that without the VLOM plugged in that may cause a whole other set of problems.

I have a 2009 Sierra 4x4 5.3l crew cab 6 speed. I just completed an AFM/DOD lifter,cam, vlom, delete. All of the electrical components worked before we started but now I have no turn signals, hazards, bright headlights, fog lights, or headlight controls from the knob on the dash. There are no codes or warning lights indicating a problem on the dash. A friend was able to connect his diagnostic tool to the truck and force all of those things to work from the tool, but none of it functions from the controls in the truck. Any ideas? I am not very good with electrical diagnostics and I miss having my truck tremendously.=-)