Just to revive this topic once more, I found that s3veral wires inside of the boot leading to the drivers door were frayed. I taped them and also discovered that the main hot wire (the black one) was broken off at the terminal inside of the connector. I managed a temporary fix by jamming another piece of wire in there to hold the connection until it warmed up enough to replace the whole harness. It worked for awhile until I got a spark out of that wire. Prior to this only the driver window was affected and all others worked from the driver controls. After the short, none of the windows work from any of the controls and the door ajar light stayed on. I just replaced the entire harness and the windows still don't operate. I know I fried something, but the question is what. The childlock buttons still work and I have control over the side mirrors. The fuse is good so I either cooked the switch or the motor/control module. I'm not sure which to start with. The vehicle is a 2014 Silverado 1500 LT. Any help would be appreciated.
