Jump to content

Samari21

Member
 View Profile  See their activity

  • Posts

    23

  • Joined

  • Last visited

 Content Type 

Everything posted by Samari21

  1. Samari21
    Yep. Battery is roughly 4 months old.
  2. Samari21
    After checking fuses, grounds, changing bulbs and harnesses and doing the “resets,” to no avail, I am humbly going to take my truck to the shop. I’m at a total loss now. I’m sure it’s the BCM. Is there anything I’m forgetting to try first?
  3. Samari21
    Can you explain that to dummy like me? I’m not very experienced with electrical lol
  4. Samari21
    Yes, all of the lights work. The right side is fine. Only the left side is “failed.”
  5. Samari21
    Isn’t the BCM near the steering column?
  6. Samari21
    Left rear.
  7. Samari21
    I have the left turn indicator failure. I’ve changed bulbs, harness, checked the grounds, checked the trailer brake and changed the fuse. I’m genuinely lost at this point. Could it be within the ECU?
  8. Samari21
    I have a 2014 Sierra SLT 5.3. I just changed the alternator and now it is giving me a service battery charging system. It wasn’t on before I changed the alternator. The battery is less than a year old as well.
  9. Samari21
    Update….I got a quote for $1000 to repaint both the door and the C-post.
  10. Samari21
    Once again, thank you for your help. I really appreciate it.
  11. Samari21
    Ok cool. Thanks for the advice. Duplicolor then clear on top, right?
  12. Samari21
    30 days if I decide to go the duplicolor and rebadge route??
  13. Samari21
    I don’t see any bare metal. I had that door repainted a couple of years ago. I’m wondering if it was a shoddy job. The front door was just fine when I removed the molding.
  14. Samari21
    What would prepping entail? Wet sanding, priming then duplicolor?
  15. Samari21
    No my friend, that there is missing paint after molding removal.
  16. Samari21
    What is my best course of action here? Duplicolor or body shop?
  17. Samari21
    This may be a silly question but can I wrap some door moldings before I attach them to the door?
  18. Samari21
    Thank you for help. I found exactly what I need.
  19. Samari21
    I am having some trouble in finding a replacement hood to cowl seal for a ‘14 1500. Any help would be greatly appreciated!
  20. Samari21
    Can someone point me in the right direction? I need to replace my lower windshield weather striping and I’m trying to make sure I get the right kind.
  21. Samari21
    So is it just 1/2 inch heater hose?
  22. Samari21
    2014 Sierra SLT 5.3L I need the hose size and hose connector coming from the coolant reservoir into the thermostat. The parts stores around here act as if they don’t exist.
  23. Samari21
    I have a 2014 Sierra and now gone through 2 window regulators. The driver window goes up about 4 inches and then goes all the way back down. I can inch it all the way up. The window also goes up very slow as well. It is driving me insane trying to figure this out.
×
×
  • Create New...