kevin77rogers

There was only a little bit at full lock in reverse. I used a hammer to tap in driver side at the black piece and it was fixed. Keep in mind different tires are sized different of course. I now have the same size 285/65/18 in Nitto ridge grabber and they are a lot smaller. Those coopers are big. Sent from my iPad using Tapatalk

2” level with 1 1/2 spacers. 285/65/18 cooper sst pro Sent from my iPad using Tapatalk

It’s is really going to depend on your wheels. Take off a wheel and see if there are slots or pockets on back of wheel. With my wheels I could have easily used a 1” without cutting studs since they have pockets. Sent from my iPad using Tapatalk

2 inch level with 1.5 spacers Sent from my iPad using Tapatalk

285/65/18 cooper mt Sent from my iPad using Tapatalk

No the wheels have cut outs on the back for the studs to go in. Sent from my iPad using Tapatalk

Sent from my iPad using Tapatalk

Here’s mine 2018, 2” RC level, 1 1/2 spacers with 285/65/18 cooper stt pro. Sent from my iPad using Tapatalk