Jump to content

AlanD_M97

Member
 View Profile  See their activity

  • Posts

    12

  • Joined

  • Last visited

 Content Type 

Everything posted by AlanD_M97

  1. AlanD_M97
    I pulled the door jam connector though the speaker hole last night and found the LIN signal wire (green/yellow) completely broken. The large black (ground?) and red/blue (power?) wire had broken insulation as well. I patched them all up and everything seems good now. I'll probably just replace the harness at some point. The hard turn the harness makes to go into the door seems like a really obvious problem point that should have been addressed a long time ago.
  2. AlanD_M97
    I wiggled the harness and door jam connector around but nothing changed. But now I've opened and closed the door a few times and its back to thinking the door is always open
  3. AlanD_M97
    Started out earlier this week with the truck thinking the driver's door was always open and the window switches in the driver's door not working. I pulled the door panel off, checked all the connections but I didn't find anything obviously wrong. Now that I have put it all back together, the truck thinks the door is always closed and the window switches in the driver's door still don't work. The radio does not turn off and the dome lights do not come on when the driver's door is open. The locks and mirrors work as they should. Any ideas where to start or what to test?
×
×
  • Create New...