Chewpeg

JM, thanks yes I do recall ignoring that in the manual. I knew there is a solution and I do need to look into it. I turn my truck on and off 30 times a day and that adds up. Thanks for the direction [emoji106] Sent from my iPhone using Tapatalk

Ya those Navs have had issues and ya we pay a ton but if you do the install properly and work the kinks out yourself as well as with the company it’s audio bliss at the end!! I enjoy it and would recommend it if someone is looking for the best quality out of your system. My negatives are the system off pops. There has to be a way to fix that. As well as the delay from door open to turning all the units involved in the system to the chimes turning on. Well that one is more of an annoyance cause I know they should be chiming immediately but there are too many things turning on for it to be instantaneous. Positives and negatives to everything whomever is looking just weight them both out and take your bet. For me it’s absolutely the NavTV. I used both methods btw. Sent from my iPhone using Tapatalk

Strange. So you have no chimes? All my factory settings and chimes are mirror image to what they were previously. Sent from my iPhone using Tapatalk

Check out These I just finished. Sent from my iPhone using Tapatalk

Email john [email protected] he will build you whatever you need and he is worth supporting. Sent from my iPhone using Tapatalk

I bought my nav last year and yes it was crap. Absolutely annoying, couldn’t handle it. I spend 4+ hrs in my truck a day and it was a pain. Since about 2 months ago they sent me out a new one and I have had maybe 4 times where I had issues. This time I can just park the truck and when I turn it back on it’s working. Last time it would keep my amps on and kill my battery. So yes that was really bad. What they have now is worth the annoyance of a few issues rather than crappy music. It’s just worth it in my opinion to get the clean Audio from the head unit so you can do what your trying to do. Yes a better option may come around but at this moment the nav is worth it. Sent from my iPhone using Tapatalk

They work. Some minor issues remain but it’s way better than the other options and sound 10x better than them. I’m calling mine quirks rather than issues. [emoji23] Sent from my iPhone using Tapatalk

Yup 2 in the front 4ohm in the rear. If you do a bare minimum just add a subwoofer. Sounds real good. Sent from my iPhone using Tapatalk

The idea here is you want a clean signal to go to the amps. The Bose amplifier really messes with the output. You can buy/get made separate adapters for the amp but if your buying this your looking to add amps. I’m super excited to get this unit and hoping for a Black Friday deal to pick this up. I’m going to use toslimk to a minidsp. Going to be amazing!!! Sent from my iPhone using Tapatalk

Very easy. The console comes off in pieces. Couple screws in the cup holder and plastic trim pieces to take off. I was impressed how easy it was. Sent from my iPhone using Tapatalk

I tied into the Center console USB plug that faces the rear. Couldn’t find anything with the amp and that USB worked nicely. Sent from my iPhone using Tapatalk

Sorry for the massive delay here. Yes I was concerned and it came to fruition. There is way too much equalizing and whatever else they do in that Bose DSP to get a clean signal. The only saving grace was using Dirac live to tune it but it’s still not good enough. I’m going to purchase the nav-tv which totally removes the Bose amp which I am extremely excited to use. Hoping for a Black Friday deal Sent from my iPhone using Tapatalk

Like you it was in my cart for over a week before I pulled the trigger. I’m running an active focal flax 3 way with the Mmats 6150 and I am grossly over powering what I have but I have no regrets. The amp has a ton of power, the woofers pound with this thing and the gains are barely touched when I tuned them so there is a lot left in it. It runs with almost zero heat coming off of it after hours of garage tuning. It’s big bold and no corners cut on quality of connections. The negative is the fan that helps keep it cool is a touch loud if you are leaving it in the open which I am not. What sold me on it is try and find one for Re sale!!!! There is none which tells me everything and bought one myself. Now I have a dream to have another to match. Sent from my iPhone using Tapatalk

It’s a pain but it will go back and yes you need to trim to where you placed everything. I even had to grind the seat back mounts to fit. Sent from my iPhone using Tapatalk

Ya at first I thought good things but after waiting 24 days after spending 1500 bucks I’ve moved on. It’s no way to run a business and I cannot support this kind of behaviour. I have PayPal and Amex working on this for me now. Lol yay!!! I hoped for good things. Talked to that john guy and he made and sent me a harness in less than a week... answered all my questions and was very professional about it. That I can support!! I sound deadened my entire truck!!! Even the headliner. Lol waaaay overboard. So I guess since you don’t have Bose you should have a better signal to process thru the DSP I am really worried about what my oem Bose amp is going to do the signal. Super exciting and really want to keep going here. If it wasn’t for that guy in a garage being shady. Why did you get the line out converter when the DSP in the amp does that exact same thing and it’ll give you the sub out?

I’m still fighting with a aug 27th purchase thru Llj Customs. My backseat is therefore not back in yet. Had a similar setup as you are doing but have decided to go minidsp 8x12 with a MMATS amp. If I ever get my money back from those (add bad words here). Sorry don’t know where the wires are. Somewhere by passenger feet from what I’ve read. Did you soundproof at all. I think that will be key too.

I second this. The guy has helped me out in such an honest way too. Amazing!! EVERYONE stay clear of those leaches at LLJ Customs. Wow they are bad. Sent from my iPhone using Tapatalk

Hello. I’m stuck here. Doing a full install and after LLJ Customs f’d me over here I’m stuck and don’t know how to connect my amps to the oem stereo?? Please help