Jump to content

Draybyrd

Member
  • Posts

    5
  • Joined

  • Last visited

Draybyrd's Achievements

Enthusiast

Enthusiast (2/11)

0

Reputation

  1. I just went and pulled the receiver from behind the rear door trim and took it apart it looks fine no water damage or broken solder. I still don’t know how it’ll sync remotes and read my tire pressure and be bad. A used one with matching numbers is only $25 on eBay so it’s worth $25 to see if that’s the problem. I’ll post back after it gets here with good news or more help. Thanks!!
  2. I have 2 and they both respond the same way.the truck will accept them in learn mode then they immediately don’t work. I’ve tested all the buttons on a rf reader they all work and holding lock and unlock on the fob is how it syncs in learn mode. Everything to do with the fobs seems to be working and everything with the receiver seems to be working (tpms,accepting fobs in learn mode) I can’t figure it out!!
  3. I’ve kinda ruled out the fobs because the truck will recognize them in program mode but once out of relearn mode the truck won’t respond
  4. 09 Silverado crew cab 4wd. After programming the key fob it won’t work?? The truck will beep accepting the fob then does nothing. No codes,no check engine light,a few new electric parts (brake and oil switches,cruise control is back but key fob only works to program then nothing. Tpms is working fine reading all 4 tires so I wouldn’t think it’s the receiver. I need some advice on what to try next? I’m wearing out the only key hole in the truck:) thanks in advance!! I just went out and tried the tpms reset with the fob and the horn honked and it went into reset mode,all tpms still good but fob will not lock,unlock,panic or start.zero response from truck unless in some form of programming mode(tpms reset,remote relearn)
  5. 09 silverado crew cab z714wd the key fob will program then not work at all. Tpms is showing good pressure in all 4 . It was spitting a code for oil pressure switch,replaced it and cleared the check engine light but still no response from truck with fob. It’s not the battery because when I’m program mode the truck beeps accepting the remote but it doesn’t work after. Any advice greatly appreciated,been using the key and setting off the alarm for about 8 months now.I’m wearing out the only key hole in the truck.
×
×
  • Create New...