Rex3
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Articles
RPO
Store
Blogs
Everything posted by Rex3
-
Thanks Richard, that's exactly what I'm going to do. Stopped at the junk yard after work and cut the harness out. Thanks for the reply.
-
Working on the headlights on my 99 gmc, plow was removed along with the wiring harness (wires cut). Question is it looks like the low and high beam have 2 wires each on the connector but there are 5 wires in the oem harness that is cut. I have the schematic but not very good with electrical. Anyone have a picture of how these wires should be wired to the connecors? Would it be better to get a used harness from a junkyard? Thanks
-
I will give that a try. I did have an error on the abs side, bad wheel speed sensor i changed that and cleared the codes and so far so good. I thought I read if there was an error on the abs it could case issues with the 4wd, was hoping that this was the case but it wasn't. I like the auto mode for winter driving. Thanks for your insight.
-
I was on dry hard surface and put it 4auto and front axle was binding like it was in 4hi. I had a 1999 Tahoe and used the 4 auto and never felt like that.
-
Yes that's exactly whats going on.
-
Hello, I have a 1999 sierra, when I put it in auto 4wd it acts like it is in 4hi. I do not have any cel, or service lights on. All the lights on the push button 4wd switch work. Any idea where I need to start looking as to why it is doing this. Thanks in advance and thanks for the add to the group.
