Agargano98

They are different, don't remember exactly what size offhand. And the 4 puck holes are oval, so I double drilled with hole saws and used a small cut off wheel to cut out the middle. I just used the caps to get the hole sizes.

I have the borla s type. Highly recommend it. No drone at all

This is the bs excuse I got for this condition. Makes the driveability terrible, especially when towing

I talked to Banks tech support today. They are currently working on an update to expand the parameters for the 2024 hds. And i should be good once that new update goes through.

Last week i brought my camper (35' TT @ 8000lbs) home for repairs. 24 2500 gas ccsb. truck only sagged 2" with the trailer hooked up. At 65mph the rear end was pretty squishy and had some sway. So i ordered a set of timbrens. Easy install, took longer to put the truck on the lift than install the timbrens. With no load i can barely squeak a 2x4 between the timbren and the axle. We will see next week how it changes the handling with the camper. Here is a before and after

Just installed a banks idash guage in my 24 2500 gasser, i have found parameters for rpm, voltage, water temp. But i can not find oil pressure, oil temp, and current gear. Which is the reason i wanted the guage. I have verified the correct software version, 1.24.0. I have not yet contacted banks, just wondering if anyone here has dealt with this.

If you look at the hitch there is a u channel in front of the ball mount. This is for clearance for a stiffener on the underside of the bed itself.

Straight edge across the bed mount holes, measuring forward, and measuring multiple times. Hopefuly when i get the bed back on tomorrow its good. Should be fine as the factory covers are oversize to the hitch.

Just had to nip back the heat shield where the two arms bolt up to the rh frame rail

Making progress

No. Had to back out of that one. Financing was stupid. Settled for an on the lot 2500 gasser

2024 2500 LT I am looking for a couple torque values. Cant find them anywhere. 1. Frame to bed bolts 2. Gooseneck hitch to frame bolts. Thank you

84632891 - hitch 11561075 - bolts x 8 84756188 - ball hole cover x 1 84756187 - puck hole cover x 4