COHusker

ok, I looked at mine again and fixed most of the klunk... I didn't read the manual close enough and the rear mechanism is supposed to be one hole forward of the rear holes... I just put them in where the stock running boards were... I guess I should RTFM.

Yea, I was coming back here to ask about the noise... Mine seem to clunk pretty loudly when retracting, esp the drivers side.

That would be awesome, but the current ones have two wires that have to be tapped into a couple plugs. It is a royal PITA if you don't have perfect eyesight and flexible to get to the plugs in the drivers foot well.

Did you get this resolved? working now? I have mine installed, only thing left to do is connect these wires... I was told it is the farthest back plug and is pin 29 for the grey plug.

Yea, that may be the easy route. We will see once it gets here.

I will just have to find a tray that works, ordered one of the Locker Down last night. The tray I have sits really low in the center console and with the newer trucks, there is a 110 outlet as well as USB plugs in there. Heck, maybe I will print one on my 3D printer. https://www.amazon.com/dp/B0CG5R7RQ4?psc=1&ref=ppx_yo2ov_dt_b_product_details

Looking for a diagram or video of how to dismantle the center console on a 2024 GMC Sierra 1500. I have a HAM radio that I would like to install and I suspect there is a decent amount of empty space down there. The radio has a remote display and mic so that doesn’t need to be by the radio. I also would like a good recommendation on where to route the antenna cable to the outside. Thanks, John

AntennaMastsRus - Short Rubber Antenna fits GMC Sierra 1500 (2006-2024) - The Original 6 3/4 Inch Accessories - Car Wash Proof - Internal Copper Coil https://a.co/d/16xDVTs this one works fine on a 2024 GMC Sierra

Locker Down or the Console Vault look very similar. Locker Down has electronic locks if that is what you like, but the Console Vault is a little less expensive. I would like to see something a little smaller as I don’t have that much I want to lock up and using either of these would interfere with my after market tray.