Search the Community
Showing results for tags 'high beam'.
Found 4 results
-
This diode installation allows all of the lights to remain on simultaneously when the high beams are activated on GM vehicles. The diode is super easy to install, you need $2 and 10 minutes. 9 of those minutes will be spent congratulating yourself.After diode placement your lights will function as follows: In auto mode- whenever your lights come on automatically the fogs will be on also. Low Beams & Fogs- Only Low Beams & Fogs will be on High Beams- Low Beams, Fog Lights, & High Beams will all be on (normally by default) The vehicle turns off the fogs when in high beam mode, but this diode solves that. MAKE SURE THE SIDE OF THE DIODE WITHOUT THE STRIPE IS IN THE 10 PIN. The diode allows electricity to travel in only one direction.
-
Low beam and high beams randomly stopped working other day on my 2015 Sierra 1500. All the grounds and fuses have been tested for power and they are all fine. All my other lights including parking, turn signals, taillights, hazards and fog lights work fine. Could it be the BCM or am I missing a fuse panel or ground? -
so i have a set of hids in my low beams and high beams i started having the problem of when i start the truck and leave the key in ignition both low beams turn on but once i put the truck in run position the left low beams turns off and i have to switch between high to low in order for the left low beam to turn back on this was about a month ago i ordered a new set of his for the low beam thinking well maybe its because I've had that set for almost 6 years. i connected the new set to the truck and about 2 weeks later i tried using my high beams and they worked fine but once i switched back to low beams both of my low beams did not turn back and i had to turn off the truck and turn it back on in order for my low beams to turn back so now i can't trust my low beams i have been driving with my high beams on for about a week and when i hit a bump sometimes one of the high beams turns off if someone can please help it would be awesome tomorrow im going to buy a new headlight relay see if that fixes the problem.
-
I've replaced the bulb and the fuse. I don't know what to do to get the high beam working again.
