Search the Community
Showing results for tags 'upfitter'.
Found 3 results
-
here are some picture and videos of how i installed my upfitter aux switches to my 2017 silverado Texas edition truck which DID NOT com with them nor does it have the relays fuses or switch wires in the harness. keep in mind the switches are GROUND or NEGATIVE switching. which means they DO NOT HAVE 12v ON THEM. DO NOT PUT 12V ON THE WIRES YOUR ABOUT TO INSTALL. i had to get a new connector from a crashed truck in a junk yard which i then pulled 4 of the pins and wires out of to install into my trucks harness plug for the upfitter switch. once i did that it was just a simple act of making a short extension wire from those 4 wires coming from the harness plug to go to the driver kick panel where im going to locate the relays for the devises i want to control. you will see the harness plug and wires where i put them. and you will see the JST plug i used to connect the 4 wires to the extension wire to run to my relays. will also upload videos soon.
-
Can anyone help? I have a 2016 diesel 2500HD and want to use the Upfitter X61A junction block - X7 plug/cable to run a lightbar. I need to add my own switch to ground, to control the X7 power relays for switch 3. I have added for switch 3 the relay, 30amp and 5amp fuses in the X50A Fuse Block, installed the upfittter X7 plug and cable in the X61A Junction block. The wiring schematic for the upfitter relays Page 396, has the trigger as X5-pin 11, however when I check the pins of the X61A Junction block -X5 pin schematic on page 593 pin 11 is assigned to "Lane Departure signal". I need help finding the 85/86 relay wire to attach a ground switch. Just a note: I plan on using pin 18 of the K9 Body control X5 plug as the ground. This should control the lightbar to only have power when the High Beam are on.
-
https://www.gmupfitter.com:80/files/media/photo/661/2016_LD_FS_CK_PU_100915.pdf Been trying to access it at gmupfitters.com since friday, apparently the site needs permissions to enter. I have the 2015 and 2017, for some reason the 2016 is not in my archives. Anyone have a copy? I would appreciate it..
