K2jer

Its close to a 2.5. Bilstiens in the front at .75 with a 2 inch spacer and the 1 inch rear spacer added.

Few pics of my truck

Finally got a chance to wash my truck with the new rims. 20x9 fuel beast 20 offset 295/60r20 toyo AT2 extreme. Rides awesome. No rubbing with just tying back rear of front inner fender.

RC 2 inch spacer and bilstein at +.75 in front and RC 2 inch block in the rear and bilstein 5100. Love the set up. Rides awesome. 100 times better then stock ranchos.

Here's the truck with the new rims and tires and the custom rc/bilstein level. Still need to wash it. haha

Sorry about the crappy cell pics and how dirty the truck is. First nice day here in the great white north. Will take some more pics tomorrow when I get my new rim and tire setup on.

Just did a custom leveling kit. RC 2" Spacer in the front and bilstein 5100 struts at .6 lift. And in the rear I used the 2" RC block and bilstein 5100 shocks. The truck rides 100% better then stock Rancho Shocks. Smooth and controlled over bumps and that stupid hope the rear end used to do is now gone. Front end is 39.75 and rear is 40.75. Super happy with stance and ride. Would recommend this setup.

I've been waiting for my beast wheels for months. DAMN!!!!!

It isn't any different. I've done about 8 trucks of this gen and never had an issue or had to undo a ball joint for any bottom spacer. Just got to make sure both wheels are off and both sway bar links are loosened off all the way.

All you have to do is loosen the sway bar bolts. You will be able to pry the control arm down enough. I did my RCX 2" this week and it was pretty easy. No need to touch ball joint, tie rod or upper strut bolts. If you undo both sides before you attempt to install the blocks that will help as the sway bar is connecting both lower control arms. Love the look of your truck BTW. They have to be the best factory wheels GM has ever come up with.

Do you have the part number for this lift?

They will have 4 terminals. Ground and power for both turn and for running lights.

For the Amber turn mod. Why not just break off the wire terminal on the bulb so you aren't cutting your truck harness and then install a new blub when you need to go back to amber?

Has anyone tried a 295/60r20. Toyo at2 extreme on a 2.5 level? I like the sizing of this tire. Would be on a 20x9 20 offset wheel