Baking83

Fyi I used 2 relays one for each headlight

How it disables the Drl the relay doesn't make a contact till the parking lights come on the Drl signale is stopped at the relay when shifted out of park when the parking lights come on with auto lights or switched out the relay contacts so the bcm can controls them

I'll try to explain it the best I can the red wire at your headlight bulb cut it from relay pin87 goes to the bulb pin 85 goes to the bcm Side of the wire you cut 85 to ground and 86 to parking light + I think it's gray at the plug at the head light you will need a test light to make sure yellow will be hot with the parking lights on don't use that 1 because it goes hot when shifted out of park

Is there a way to upload pictures I've got it drawn out do you know how to wire a relay

Email me I'll help you [email protected]

On how to wire it?

Just a 4 or 5 pin relay from autozone

There's a way to disable them with 2 relays I've done my 15 silverado email for more info on it [email protected]

Update on my Drl kill with relay a guy told me he would like to run just parking lights the way I had it it couldn't be done so I started thinking and rewired my headlights like the and it works just like factory but with no drls 4 pin relay 87 to headlight bulb red 30 red headlight feed from bcm so your cutting the red wire at your bulb and 87 to bulb and 30 to bcm side of wire 86 goes to your parking light + 85 to ground

Ok it's really easy there's a plug on your headlight just under the battery I believe the wire you want is gray but I'm not sure you will need a test light the yellow one in that plug will make you think you can use it but don't so with parking lights on test that plug there's like 5 wires on it 2 of the wires will be hot with the parking lights on but don't use Yellow tie in to the gray I think it is and that's your trigger pin 86 on a relay pin 30 goes to your + battery pin 85 battery ground pin 87 will be your new head light feed so here's what I did pull the bulb cover off and drilled a small hole just to the right of the round cover cut the red wire going to the headlight bulb and that's where 87 will tie into make sure to tape the other end of the red wire so it don't short your bcm

http://youtu.be/M2M8ja6OMq4

http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8'>http://youtu.be/-90n_f4YMG8 http://youtu.be/-90n_f4YMG8

15 drls disabled with a relay http://youtu.be/-90n_f4YMG8 sorry I'm hard to hear email me and I will help you with yours